How do you adjust the chain on a Polaris 6×6?

How do you adjust the chain on a Polaris 6×6?

Front Drive Chain Adjustment

1. Loosen chain guide.
2. Loosen two eccentric locking.
3. Loosen caliper mount bolts.
4. Insert a pin punch through the.
5. Roll the vehicle ahead or back.
6. Tighten caliper mount bolts 10-12 ft.
7. Tighten the eccentric locking bolts to 45 ft.
8. Confirm correct tension by rolling the 6×6 forward, checking chain.

How do you adjust the chain on a Polaris Trailmaster 330?

adjustment is required.

1. Remove the chain guard (if. equipped).
2. Loosen the chain guide.
3. Loosen the two eccentric. locking bolts.
4. Loosen the caliper mounting. bolt located on the left side of. the swing arm.
5. Insert a pin punch through the.

How do you tighten the chain on a RZR 170?

Drive Chain Slack Adjustment

1. Loosen the four rear housing. mount bolts (two on each side).
2. Loosen the chain adjuster lock. nuts.
3. Turn the chain adjusters clockwise. to 1/4″-1/2″ (6-12 mm) deflection.
4. Tighten the chain adjuster lock. nuts to 18 ft. lbs. ( 25 Nm). Hold.
5. Tighten the four rear housing.

How do you adjust the chain on a 2001 Polaris Trail Boss 325?

how to tighten chain trailboss 325

1. Pull Down the Suspension till it is bottomed out.
2. Loosen the bearing carrier bolts on the rear axle.
3. Insert punch through hole in chain sproket into bearing carrier.
4. Adjust till you have 3/8″ slack in the chain on top midway up swingarm.
5. Tighten carrier bolts to 45 ft.

How do I keep my chain from falling off my ATV?

Re: chain keeps coming off Check for a play in your swing arm pivot bearings (where the swing arm bolts to the frame). If the bearings are worn out and it makes a big play and that the chain is loose, your chain will come off. You can also put a banshee chain slider on your swing arm to help prevent this.