How do you reset the oil light on a Honda Rancher 420?

How do you reset the oil light on a Honda Rancher 420?

On the 420 with the key switch off press and hold the od/trip button and turn the key on while holding the button, will go off in a few secs.

How do you reset the oil light on a Honda ATV?

How to Reset the Oil Light in a Honda Four-Wheeler

1. Turn the ignition on without starting the engine.
2. Press and hold the trip meter select button.
3. Press and hold the “Reset” button.
4. Release both buttons after the oil light disappears.

What does the wrench mean on a Honda 420?

It indicates that it is time for a maintenance/oil/filter change. It will come on at 100 miles, and then every 600 miles thereafter.

How do you change the oil on a Honda Rancher 420?

If you need to replace it, Honda has a drain bolt crush washer available for purchase.

1. Remove the old oil filter while the used oil drains.
2. Inspect the O-rings on the oil filter cover and around one of the bolt holes for the cover.
3. Replace the right-hand side plastic.
4. Refill the engine with oil.

How do I reset my Honda Pioneer 700?

It’s the same on the 700.. Once you changed the oil to reset it push and hold the button on the meter (with key off), turn key on while holding the button and within a few seconds the wrench will be gone.

What does oil life mean Honda?

You’ll see “Oil Life” with a percentage number on your dashboard. This is your Oil Life indicator, a convenient and important part of your Honda’s maintenance reminder system. So at 40%, your oil still has 40% of its lifetime remaining to do its job before it needs to be replaced.

Where is the oil filter on a Honda Foreman?

Changing Honda Foreman 500 Oil

1. Changing Honda Foreman 500 Oil.
2. Position a drain pan under the engine, and remove the 17mm drain bolt and crush washer from the bottom of the engine.
3. Remove the seat and the right-side fairing to access the oil filter.
4. Remove the three 8mm bolts and the oil filter cover.