How many horsepower is a Ford 601 Workmaster tractor?
Ford 601 Workmaster is equipped with a Ford diesel 4-cylinder 8-valve liquid-cooled vertical inline engine, which produces 42.7 hp power at rated rpm 2200. Ford 601 Workmaster featured with a 4×2 2WD, 3,291 lbs weight, 567 kg Rear lift capacity, and 4 forward and 1 reverse gears.
What years were the Ford 601 Workmaster made?
Ford 601 Tractor Service Manual (1957-1962)
Is a Ford 641 Workmaster a good tractor?
It is a great running little tractor, and I didn’t get hurt on the price (the tractor has new tires, brakes, clutch, distributor), but it looks like it has a lot less power than I had thought it would have.
How many horsepower does a 641 Ford tractor have?
Ford 641
| Ford 641 Power | |
|---|---|
| Engine (gross): | 48.4 hp 36.1 kW |
| Belt (claimed): | 32 hp 23.9 kW |
| Plows: | 2 (14-inch) |
| Drawbar (tested): | 29.82 hp 22.2 kW |
How much horsepower does a Ford 600 tractor have?
Ford 4 Cylinder, 4 Speed 134 Cubic Inch Gas Engine
| Engine Make: | Ford |
|---|---|
| Speeds: | 4 |
| Cubic Inches: | 134 |
| PTO HP: | 32 PTO HP |
| Ford 600 Weight: | 2462 Pounds (lbs.) |
Does Ford 601 have live PTO?
It does have live hydro but does not have live pto. It has four forward gears..
Does Ford 801 have live PTO?
Also offered: live PTO, three-point hitch, larger rear tires, heavy-duty front end and power steering. Depending on the selection of options, the middle number of the tractor’s designation would change.
What year is 801 Ford tractor?
The Ford 801 was a Ford agricultural tractor produced from 1957 to 1962. Models released in 1957, including the 801 model, featured a new front grill with cross-section bars. The 801 model was known as the “Powermaster 801,” designating its engine specification that made it different from the base 601 model.
How much does an 801 Ford tractor weigh?
The 801 series was produced from 1957 to 1962. The lighest weight was 2836 LBS and heaviest was 3657 LBS.
Is a Ford 2000 tractor gas or diesel?
Ford 2000 Tractor was equipped with Ford diesel 4-cylinder liquid-cooled engine, which produces 36 hp (26.8 kW) power at rated rpm 2000. Ford 2000 Tractor was featured with a 5 qts (4.7 L) Oil capacity, 36 horsepower, 31 hp PTO power 4×2 2WD, Ford 2.4L 4-cyl diesel engine and Ford 2.2L 4-cyl gasoline engine.
Where is the serial number on a Ford 801 tractor?
The 801 series tractor serial number location is on the flat area above and behind the starter. A diamond symbol denotes the beginning and end of the serial number.
How do you tell what year my Ford tractor is?
To determine this, look at the tractor production code, also known as the unit date code. The first digit of the tractor production code gives the production year. For tractors manufactured between 1965 and 1974, the digit corresponds with the last number in the year.
How can I tell how old my Ford tractor is?
The best way to identify a tractor is by the serial number. Serial numbers on the 9N-2N and 8N tractors are located on the left side of the engine block, just below the head and behind the oil filter. The numbers are usually not stamped very deep (or very straight).
What’s an 8n Ford tractor worth?
To give you an idea how year of manufacture affects value, a 1939-1947 9n/2n in similar condition would have a minimum value of around $500 and an older 8N, around $1000. Very few tractors of this era have values that aproach that of the Ford N’s for two reasons: 3 point hitch and parts availability.
What is the difference between an 8n and a 9n Ford tractor?
They really are basically the same. Only major differences are a couple horsepower, 8n has 4 speed trans and 9n has 3 speed trans. 8n is newer than the 9n and has more hp. Newer 8n have side distributor older 8n’s and 9n’s had front distributor.