What is the tire pressure for a 2019 Hyundai Elantra?
Recommended tire pressure for 2019 Hyundai Elantra is 33 psi to 36 psi for front tires and 33 psi to 36 psi for rear tires.
How much air do I put in my car?
Most passenger cars will recommend 32 psi to 35 psi in the tires when they’re cold. The reason you check tire pressure when they’re cold is that as tires roll along the road, friction between them and the road generates heat, increasing both the temperature and the air pressure.
What is the correct tire pressure for a 2016 Hyundai Elantra?
The recommended tire pressure for the 2016 Hyundai Elantra iS33 psi for the front and the rear tires for all sizes. The size of the tires on the vehicle is 205/55R16 and 215/45R17 for the GT, 215/45R17 for the Limited and Sport, 195/65R15 and 205/55R16 for the SE and 205/55R16 for the Value Edition.
Where is the TPMS button?
The TPMS reset button is usually located beneath the steering wheel. If you are unable to find it, refer to your vehicle’s owner’s manual. Inflate all tires to 3 PSI over their recommended amount, then deflate them completely.
How do you reset the TPMS on a Hyundai Elantra 2020?
First, turn the ignition to the “ON” position without starting the vehicle. Now, press the “TPMS Reset” button (which is found beneath the steering wheel) until You see the tire pressure light blink three times and then release the button. Start the vehicle and wait for at least 20 minutes for the sensors to refresh.
How do you turn off the TPMS light on a Hyundai Elantra?
If you don’t start the car, turn the key to the “On” position. The TPMS reset button should be held until the light blinks three times. If you want to reset the sensor, start the car and let it run for 20 minutes.
What does TPMS mean on a Hyundai Elantra?
Tire Pressure Monitoring System
How do you turn off the low tire pressure light on a 2018 Hyundai Elantra?
To reset the tpms light in a 2018 hyundai elantra, turn the ignition to the on position without starting the engine. Press and hold the tpms reset button until you see the associated light blink three times. Release the button, start the car, and allow it to run for 20 minutes to finish the resetting process.