Where is the OBD2 port on a 2002 Hyundai Sonata?

Where is the OBD2 port on a 2002 Hyundai Sonata?

As you face the front of the car, the obd port is in the upper right side corner under the steering wheel. It is almost completely behind the lower dashboard cover and can only be seen by shoving the accelerator with your head.

Where is the OBD fuse?

One under the hood, one in the trunk and another behind the dashboard. The OBD fuse may be listed on the fuse cover as OBD II, DLC, Accessory port, 12 v power point or cigarette lighter and will most likely be located inside the vehicle. The most efficient way to locate it is check the drivers manual.

Where do you plug in check engine light Hyundai Sonata?

OBD connector location for Hyundai Sonata (NF) (2004 – 2010)

1. The OBD connector is located above the pedals.
2. The OBD II plug is on the left of the clutch pedal.
3. Here is the OBD II port.

Where is the OBD port on a Hyundai Sonata?

OBD connector location for Hyundai Sonata (LF) (2014 – 2019)

1. The OBD II socket is located on the left of the steering wheel.
2. Remove the plastic cover under the open hood lever.
3. OBD plug is here.

Where is the OBD port on a 2012 Hyundai Sonata?

The OBD-II port is usually located under the dashboard, beneath the steering wheel column (1 – 3 in the diagram below).

Where is the OBD port on a Hyundai I20?

OBD connector location for Hyundai I20 (2008 – 2014)

1. The OBD socket is under the steering wheel on the left.
2. Remove the plastic cover to see the fuses box.
3. Here is the OBD port.

Where is the OBD port on a 2013 Hyundai Sonata?

The 2013 Hyundai Sonata OBD port location can be found to the right in the driver’s side footwell near the gas and brake pedals. The OBD port will allow You to connect a diagnostic tool to the vehicle and get fault errors.

What obd2 protocol does my car use?

There are 5 types of OBD2 protocols:

• SAE J1850 VPW: This OBD2 protocol is used by Ford.
• SAE J1850 PWM: Common Motors utilize this protocol.
• ISO 9141-2: You will find this protocol on Asian, Chrysler, and European cars.
• ISO 14230 KWP2000: This protocol is found in Asian vehicles.

Where is the OBD port on a 2007 Hyundai Elantra?

OBD connector location for Hyundai Elantra HD (2006 – 2011)

1. The OBD II socket is located above the pedals.
2. The OBD connector is above the pedals.
3. Here is the OBD port.