How do I reprogram my G35 Key?
How to Program the Infiniti G35 Smart Key
- Sit in the driver seat of your G35.
- Insert the key into the ignition and turn it to “ACC.” Push and release the “Lock” or “Unlock” button.
- Unlock the car doors then lock them again using the switch on the driver door panel if you have additional remotes to program.
How do I program my Infiniti?
How to Program an Infiniti Key FOB
- Sit in the driver’s seat and close all doors.
- Insert the key in the ignition and remove it from the ignition.
- Put the key into the ignition and turn the ignition to the “accessories” setting.
- Press any button on the remote within five seconds of putting in the key.
How do I get my Infiniti G35 out of lock mode?
If the problem persists, then try the following:
- Turn Off the ignition switch.
- Turn On the ignition switch using the registered key (do not start the engine yet). Wait for 5 seconds.
- Return the key to Off position.
- Repeat steps 2 and 3 twice (for a total of 3 cycles)
- Start the engine.
How do you reset anti-theft?
Insert the car key into your car’s ignition and turn it on. The car’s accessories will be activated but not the engine. Step 3: Do another check on the anti-theft light. If it isn’t blinking any longer, then turn the key over to the Off position and let it sit for a couple of minutes.
What is NATS malfunction?
Both P1610 and P1614 indicate a NATS (anti-theft system) malfunction, yet P1610 is a resulting DTC from the “LOCK MODE” condition which is set for various NATS malfunctions or an improper key being used. It prevents the car from starting (for some period of time, even if the key issue is rectified).
How do you bypass Nissan Anti-theft system?
Turn the key to unlock your car door, but don’t release it. Hold the key in this position for 20 to 30 seconds. This lets the system know you have the correct key, and it can allow you to bypass the alarm system. Some vehicles recognize the key simply by turning the key back and forth in the door lock key cylinder.