How do you program a Uniden Bearcat scanner BC60XLT?

Re: How do I program my Uniden Bearcat BC60XLT-1… Press Manual, enter the channel number, then press manual again, enter the frequency you want including the decimal point, then press E to enter. If you make a mistake, press CLR twice to erase….. Get your frequencys for your state at www.

How do I setup my Uniden Bearcat scanner?

Press HOLD.
Enter desired Channel (Not Frequency)
Press HOLD.
Press the FUNC key.
Press E.
Enter in the Frequency you want to program.
Press E to store the frequency in. Done!

How do you program a Uniden Bearcat 30 channel 10 band?

How to Insert Codes on a 30 Channel 10 Band Radio Scanner

Turn the “Volume” knob to the right to turn the scanner on.
Press the “Manual” button on the control panel of the device.
Enter the frequency for the first emergency station you want to save.
Repeat Steps 2 and 3 for each frequency you want to save.

How do I reset my scanner?

To reset the Internal Scanner settings to factory defaults, follow the steps below:

Click on ‘Start’ > ‘Settings’ > ‘System’ > ‘Intermec Settings’
Click on ‘Data Collection’ > ‘Internal Scanner’
Click on the Menu at the bottom of the screen.
Click on Restore Menu Defaults.
Click Yes.

What frequency do police scanners use?

Public Safety Spectrum

Frequency	MHz Available for Public Safety
25-50 MHz (VHF Low Band)	6.3 MHz
150-174 MHz (VHF High Band)	3.6 MHz [non-contiguous]
220-222 (220 MHz band)	0.1 MHz
450-470 (UHF Band)	3.7 MHz [non-contiguous]

How do you program a digital police scanner?

How to Program a Digital Police Scanner

Locate the battery compartment on the scanner first and make sure that you have a battery installed.
Press the “Manual” button on the scanner.
Enter the channel that you would like to start programming.
Enter the frequency number.

What are common police codes?

Police 10 Codes

Code	General Purpose	APCO (Association of Police Communications Officers)
10-1	Unable Copy – Change Location	Signal Weak
10-2	Signal Good	Signal Good
10-3	Stop Transmitting	Stop Transmitting
10-4	Acknowledgment (OK)	Affirmative (OK)

How do you program trunked frequencies?

Enter programming mode on your scanner by pressing “Prgm” on the control panel. Press the “Trunk” button to select the trunked frequency option and then enter in the trunk number you want to program. This will be a number between 1 and 10.

Can police scanners hear cell phones?

Cell phone calls are encrypted on the air link – you CANNOT hear them with any regular scanner. 3/4G and LTE calls are VOIP calls and are purely data calls anyway – so as well as being encrypted, they are just random data flying through the air and impossible to intercept without very sophisticated equipment.

Can I turn my iPhone into a police scanner?

5-0 Radio Police Scanner This app is the most popular police scanner iOS app having been downloaded over 20 million times. It includes a sleek interface that is easy to navigate. You can browse a huge list of police scanners around the world as well as choose from 100 of the most popular scanners.

What is a cop scanner?

What are scanners? A scanner is a radio receiver that checks (“scans”) many channels quickly to allow you to listen to two-way radio calls. Two-way radios, used by police, fire and others, use short transmissions that occur on thousands of radio channels.

How do cop scanners work?

Automatic plate recognition systems are usually composed of cameras, a processing unit and software. As officers drive on patrol, the cameras take photos of nearby vehicles, and license plate information is passed through databases to instantly check whether the car or driver has been linked to crime.

What states is it illegal to have a police scanner?

States That Restrict Police Scanner Use in The Furtherance of a Crime

California.
New Jersey.
Michigan.
Oklahoma.
Rhode Island.
South Dakota.
Vermont.
Virginia.