What is the speed of Pentium III processor?
Pentium III
| General information | |
|---|---|
| Max. CPU clock rate | 400 MHz to 1.4 GHz |
| FSB speeds | 100 MHz to 133 MHz |
| Architecture and classification | |
| Min. feature size | 0.25 μm to 0.13 μm |
Is 2666 MHz RAM good?
2666mhz ram is fine for Intel CPUs. AMD, on the other hand works much better with faster ram (3200 or better). AMD CPUs will get better FPS from faster ram. If you have an Intel CPU you are fine.
Does RAM speed matter for Intel?
yes Ram speed matter for any processor if u have anything faster than 2400mhz(RAM)Its enough.
Can you use two different speeds of RAM?
You can use memory modules of different speeds as long as they are faster than those specified for your computer. It is recommended to use modules of the same speed as those already installed in your system. If you do mix speeds, the modules will all run at the speed of your slowest modules.
Is it OK to use all 4 RAM slots?
A common misconception about RAM is that you can put any RAM into any slot. You can do that, but it won’t work, or it will work ineffectively. If you have four RAM slots, always buy matched pairs of RAM (two sticks from the same company, same speed, and same capacity) for the best results.
Is 3 sticks of RAM better than 2?
Will it be ok to use 3 identical ram sticks? – Quora. Yes, it will add more RAM. Add as many as your motherboard will support. However it would be better to add two with the same total memory as three due to dual channel memory being faster.
Can I put RAM in slots 3 and 4?
In a motherboard with two RAM slots, you’ll just put your first stick of RAM into Slot 1 and a second stick into Slot 2. If you have a third stick, it would go into Slot 3, which will actually be between Slot 1 and Slot 2. Finally, a fourth stick would go into Slot 4.
What happens if I put RAM in wrong slots?
The worst that can happen is no boot if RAM is at wrong slots. But no damage of any kind either to RAM or motherboard.
Which RAM slots are faster?
If the manual recommends DIMM slots 1 and 2, those will provide dual channel speed. If you have them in 1 and 3, you are losing some performance by only being in single channel speed. If you add another pair of matched RAM sticks, they should go in 1 and 4. The manual has it in slots 2 and 4, not 1 and 2.