What is cargo gear register?
CARGO GEAR SERVICES. SHM is well equipped with the infrastructure and technical expertise to inspect, test and endorse all lifting appliances and loose gears in the Indian Cargo Register, as per Dock Workers (Safety,Health,andWelfare) Regulations.
What is chain registry?
A record of the particulars of test and examination of lifting appliances, loose gear and heat (annealing) should be entered and maintained in the register of machinery, chains, wire ropes etc. called the Chain Register. It is a blue coloured booklet also referred to as Form 99.
Who is a competent person as per chain register?
Form No. 4: Certificate of test and thorough examination of wire rope. (a) The term “competent authority” means a minister, government department, or other authority empowered to issue regulations, orders or other instructions having the force of law.
Who approves chain register?
A Chain Register Register is to be standard international form as recommended by the International Labour Office in accordance with the ILO Convention No. 152. Chain Register to be maintained up to date as per the requirement of the Dock Safety Regulation and endorsed and signed by a competent person as required.
What is the frequency of a thorough examination b thorough examination and load test for lifting appliances?
Various national regulatory schemes require that lifting appliances should be thoroughly examined by a ‘competent person’ at least once every 12 months.
How often should lifting appliances and items of loose gear be thoroughly inspected by a competent person?
once in every 12 months
How often should cargo hoisting equipment be thoroughly examined?
Why is it important to inspect wires ropes blocks and loose gears?
Wire ropes should be regularly inspected for loose or broken strands or internal damage. It is recommended that special attention be paid to the condition of eye splices. In considering the care of wire ropes the manufacturer’s specified maintenance and care requirements should be complied with.
When should you dispose of wire ropes?
General Discard Criteria : Crane Wire Ropes For single layer (6 and 8 strands) and parallel closed ropes if number of visible broken wires exceed 4% of total load bearing in all outer stands of the rope, over a length of 6d or 8% in 30d.
What are the functions of wire rope?
Wire ropes are used dynamically for lifting and hoisting in cranes and elevators, and for transmission of mechanical power. Wire rope is also used to transmit force in mechanisms, such as a Bowden cable or the control surfaces of an airplane connected to levers and pedals in the cockpit.
What is the additional wire rope attached to the head of each boom and led to the deck beside the regular outboard guy?
(2) Equalizing guys and preventers. Besides the regular outboard guy on the fixed boom, an additional wire is attached to the head of the boom and led to the deck to act as a preventer. Crews must avoid rigging the preventer so that the guy takes all the stress and the preventer takes stress only if the guy parts.
What are the two types of standing rigging on a yard and stay rig?
Most fore-and-aft rigged vessels have the following types of standing rigging: a forestay, a backstay, and upper and lower shrouds (side stays). Less common rigging configurations are diamond stays and jumpers.
How many fathoms are in a shot of anchor cable?
15 fathoms
What does 2 shots mean on a yacht?
A shot of anchor chain is measured either in fathoms or feet. Each shot is 15 fathoms or 90 feet long, which for all you mathematical types equals six feet per fathom. After 90 feet of chain it is followed by a white detachable link with two white links on both sides; this identifies the 2nd shot.
How much is a shot on anchor?
What is a shot? – Quora. A shot is a specified length of anchor chain. 1 shot being 15 fathoms of anchor chain, a fathom being 6 feet.