What kind of oil does a jeep CJ5 take?
Engine Oil
| Viscosity: | 10W-30, 10W-40 (Above -18) 20W-40, 20W-50 (Above -1) 5W-30 (Below 16) |
|---|---|
| Capacity: | 3.1 quarts (with filter). GMAfter refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
How much oil does a jeep 4.2 take?
| Description | Type | Capacities |
|---|---|---|
| 5.0L (304ci) Engine Oil | 5W-30 or 10W30 | 5 Quarts /4.7 Liters |
| 4.2L Engine Oil | 5W-30 or 10W30 | 6 Quarts / 5.7 Liters |
| 2.5L Engine Oil | 5W-30 or 10W30 | 4 Quarts / 3.8 Liters |
| 5.9L Coolant | 50/50 Mixture 3 Year Formula IAT (Inorganic Additive Technology) | 14.5 Quarts / 13.7 Liters |
How do you tell the difference between a 232 and a 258?
The only way to tell the difference between a 232 and a 258 is by the number on the block. There is no visual difference that I am aware of. If the engine is original to the 1977 Jeep however it would be the 258.
How much oil does a Jeep 258 take?
Engine Oil 5.5 quarts. (with filter)After refill check oil level.
What oil goes in a Dana 300?
gear oil
What’s the difference between NP205 and NP208?
NP205= gear driven, cast iron case, 1.96:1 low, very strong T-case. NP208= chain driven, aluminum cased 2.6:1 or so low range not so strong and vulnerable to rocks due to aluminum case.
Is NP205 full time 4WD?
The NP 205 is a part time case meaning your in 2-wheel or your in 4-wheel. Leave the hubs locked in and shift from 4-hi to 2-hi as needed otherwise drivetrain damage may result.
Is the NP205 chain driven?
In 1971, New Process introduced a model NP203 (chain-driven), and NP205 (gear-driven) transfer case. In 1981, GM introduced the NP208 chain-driven transfer case. The NP208 also has a circular bolt pattern, and had either a 27 or 32 spline input.
How much power can a NP205 handle?
They’re rated about 195 hp and 520 ft/lb of torque in stock configuration.