What transfer case is in a Jeep TJ?

What transfer case is in a Jeep TJ?

Jeep introduced the NP 241OR RockTrac transfer case in the Rubicon package in the TJ (and continued it in JK) Jeep Wrangler. The NP241OR has a 4:1 low gear ratio acheived through planetary reduction.

Is a 242 transfer case good?

The design of the 242 is fairly good. They were engineered for durability and simplicity of build – both an advantage to the OEM assemblers as well as individuals servicing them. The NP242 transfer case has turned out to be stronger than expected.

What fluid goes in a NP208 transfer case?

since the 208 is chain driven, it takes transmission fluid. dextron III/mercon to be specific.

How much oil goes in a transfer case?

The fluid level and condition can be checked through the fill plug. In most vehicles, a transfer case is filled with a small amount of gear oil (usually SAE 75W-85, 80W-90 or 75W-140 grade). The transfer case of the Toyota FJ Cruiser in the photo, for example, takes only 1.5 quarts (1.4 liters) of SAE 75W gear oil.

Is a 208 transfer case good?

The New Process 208 is a chain-driven transfer case. This transfer case is a good gear box with a low ratio of 2.61:1. The weakest part of this transfer case is that the shifter fork wears easily, causing shifting problems. This transfer case was used in production vehicles manufactured from GM, Dodge, and Ford.

How many quarts does a NP205 take?

The NP205 holds 2.5 qts.

How much oil does a NP435 hold?

For Manual Transmission: NP435 (4-SPD)….EP All TEMPS….80W

Notes:	EP is Extreme Pressure Gear Oil Ford Specification M2C83C
Capacity:	NP435 (4-SPD) 6.3 pints

How much does a NP435 weight?

New Process NP435 Transmission Specs

Transmission:	New Process NP435 (various sub-models)
Input Shaft:	1-1/16″, 10 spline for Ford & GM applications, 23 spline in Dodge pickups
Output Shaft:	31 spline (4WD), 28 spline (2WD)
Weight:	~ 120 – 135 lbs
Fluid Type/Spec*:	Straight 50W or 80W-90 gear oil (non-hypoid recommended)