How much hydraulic fluid does a John Deere 2210 take?
Transmission and Hydraulic System Capacity – 13 L (3.4 gal). After replacing the transmission/hydraulic fluid, check the level with a dipstick.
How many quarts of oil does a John Deere 2210 hold?
2.1 qts
How many horsepower is a 2210 John Deere?
23 hp
What engines do John Deere tractors use?
Kawasaki, Yanmar, Kohler, and B ; S- these are some of the names that John Deere out-sources from. Their compact and sub-compact tractors often have diesel engines made by Yanmar. Yanmar actually manufactured tractors for John Deere for almost 30 years!
What years did John Deere make the 2210?
The John Deere 2210 is a 4WD sub-compact utility tractor manufactured by John Deere in Augusta, Georgia, USA from 2003 to 2006.
Is the John Deere 2210 a good tractor?
– the 2210 has a pretty good turning radius for its size. That, coupled with the responsive HST pedals, make for pretty good mowing around trees. – The front wheels have mechanical, on-the-fly, selectable engagement. – I use 4WD more than I thought.
What oil does a John Deere 2210 use?
John Deere makes a full synthetic in the 0W-40 Plus 50 and so does Shell in 5W-40 as does many others. Use the oil that suits you BUT meets John Deere specs and use a GOOD quality oil filter. The Deere oil filter is made by Fleetguard and is about the best filter out there and cost less than $6.
What does a John Deere 2520 weigh?
1,865 lb.
How much horsepower does a 2520 John Deere tractor have?
John Deere 2520
| John Deere 2520 Power | |
|---|---|
| Engine (gross): | 26.4 hp 19.7 kW |
| PTO (claimed): | 20.5 hp 15.3 kW |
What HP is a JD 2520?
John Deere 2520 Compact Utility Tractor is equipped with a Yanmar 3TNV82A diesel 3-cylinder liquid-cooled 81.2 ci [1.3 L] engine, which delivers 26.4 hp (19.7 kW) power at rated rpm 2600.
How much horsepower does a John Deere 2510 have?
John Deere 2510 Tractor. What we know about the John Deere 2510 tractor is that it has a 4 cylinder Gasoline, or Diesel Engine that produces 46.8 horsepower at the drawbar. Shown left is a picture of the John Deere 2510 tractor. The John Deere 2510 tractor has a pto tested at 54.9 hp.
What does a John Deere 148 loader fit?
Attachments. Adding a loader to your utility tractor will allow you to tackle a wide variety of jobs, such as carrying soil, gravel, mulch, firewood, garden supplies, as well as snow. The John Deere loader 148 is an attachment designed to fit several models of John Deere farm and agricultural tractors.
What does a 2010 John Deere weigh?
John Deere 2010
| Dimensions & Tires | |
|---|---|
| Wheelbase: | 87 inches 220 cm |
| Weight: | 5054 to 5120 pounds |
| Front tire: | 6.00/6.50/7.50-16 |
| Rear tire: | 12.4/13.6/14.9-28 |
What’s the horsepower on a 2010 John Deere tractor?
41.4 horsepower
What year is a 2010 John Deere tractor?
In this line, various tractors became incredibly reliable and are still in use today – most notably, the John Deere 4020. However, a few losses came beside the victory. In my opinion, John Deere 2010 is a tractor to steer clear of….John Deere 2010 Tractor Serial Numbers.
| 1960: | 10001 |
|---|---|
| 1964: | 44036 |
| 1965: | 58186 |
How much oil does a John Deere 2010 hold?
John Deere 2010 Wheel Engine
| Engine Detail | |
|---|---|
| John Deere | |
| Starter volts | 12 |
| Oil capacity | 5 qts 4.7 L |
| Coolant capacity | 12 qts 11.4 L |
Where is the hydraulic filter on a 2010 John Deere?
Hyd filter is accessed on RH side of trans housing held in place by a cap held in place with 3 capscrews.
What is 303 tractor hydraulic fluid?
SHIELD® 303 TRACTOR HYDRAULIC FLUID is a multi-functional lubricant and hydraulic fluid for use in farm equipment manufactured prior to 1974 specifying one fluid for transmission, hydraulic, power steering, wet brake and power take-off (PTO) systems and specifying JDT 303, J20-A or equivalent fluid performance.