What does the curved arrow sign mean?
If you are in a lane marked with a curved arrow or a curved arrow and the word ONLY, you must turn in the direction of the arrow. If your lane is marked with both a curved and straight arrow, you may turn or go straight. Double solid white lines separate lanes of traffic going in the same direction.
What does a round advance warning sign tell a driver?
Round yellow Advance Warning sign The round black-on-yellow warning sign is placed ahead of a public highway-rail intersection. The Advance Warning sign tells you to slow down, look and listen for the train, and be prepared to stop at the tracks if a train is coming.
What does the arrow sign mean?
Arrow traffic signs direct vehicles and prevent accidents with plain and simple directions. Point people in the right (or left) direction. Signs are often placed underneath another sign – to reinforce instructions or directions.
What does a warning sign tell you?
A warning sign is a type of sign which indicates a potential hazard, obstacle, or condition requiring special attention. Some are traffic signs that indicate hazards on roads that may not be readily apparent to a driver.
What does a warning sign look like?
Most warning signs are yellow and diamond-shaped with black letters or symbols. Some common warning signs are shown on the next slides. This sign warns you that the road ends ahead. Slow down and prepare to safely turn left or right.
What is the shape of a warning sign?
diamond
What are the different warning signs?
These signs contain instructions on what CAN’T be done or MUST be done:
- Prohibition Signs – CAN’T DO.
- Mandatory Signs – MUST DO.
- Danger Signs – KILL YOU.
- Warning Signs – HURT YOU.
- Emergency Information Signs – SAFETY FIRST.
- Fire Signs – FIRE EQUIP.
What is the toxic sign?
The skull-and-crossbones symbol, consisting of a human skull and two bones crossed together behind the skull, is today generally used as a warning of danger of death, particularly in regard to poisonous substances.
What are the 9 hazard symbols?
Hazard pictograms (symbols)
- Explosive (Symbol: exploding bomb)
- Flammable (Symbol: flame)
- Oxidising (Symbol: flame over circle)
- Corrosive (Symbol: corrosion)
- Acute toxicity (Symbol: skull and crossbones)
- Hazardous to the environment (Symbol: environment)
What are the 4 types of signs?
There are four types of wayfinding signs: identification, directional, informational, and regulatory. As standalone signs, they serve a specific role; as part of the greater wayfinding system, they inform each other.
What Colour is a warning safety sign?
Yellow
What color is a warning safety sign?
Health and Safety (Safety Signs and Signals Regulations) 1996
| Type | Shape | Colour |
|---|---|---|
| WARNING SIGNS These signs give warning of potential risks | Triangular | YELLOW with black symbol or text |
| MANDATORY SIGNS Signs that require actions or activities that will contribute towards safety | Circular | BLUE with symbol or text in white |
What shape is a no passing sign?
The no passing zone sign is meant to mark where drivers cannot safely pass. No passing zone signs are pennant shaped, meaning that the sign tapers into a horizontally oriented isosceles triangle shape. Located on the left-hand side of roads and highways to warn drivers that they are entering a no-passing zone.
What message will be found on this pennant shaped sign?
No Passing Zone
What is a chevron sign?
This sign warns you of a change in direction or narrowing of the road. You may find several of these signs on the outside of a sharp curve or on approaches to a narrow bridge.
What do upside down chevrons mean?
: a sleeve badge of one or more bars or stripes usually in the shape of an upside-down V indicating the wearer’s rank (as in the armed forces) Click to see full answer.
What does the chevron alignment tell us to do?
Chevron Alignment (W1-8) signs emphasize and guide drivers through a change in horizontal alignment. Because of their pattern, size, and placement with at least two of the signs in view of the motorist, they define the direction and sharpness of the curve, the best of all the traffic control devices.
What does a Chevron sign look like?
A chevron (also spelled cheveron, especially in older documents) is a V-shaped mark, often inverted.
Do chevrons point up or down?
Chevrons were sewn on the sleeves of uniforms with the point down from approximately 1820 to 1903. They were worn with the points both up and down between 1903 and 1905 after the first reversal from ”down” to ”up” was authorized on 1 May 1903 in Army Regulation No. 622, dated 1 May 1903.
Which way should chevrons point?
In the U.S. Army and Marine Corps, chevrons typically point towards the neck (though prior to the 20th Century this was not true); in the U.S. Air Force, Navy, and Coast Guard, and in Commonwealth usage, they usually point away from the neck.
What are chevron road markings?
Areas of white diagonal stripes or chevrons painted on the road. These are to separate traffic lanes or to protect traffic turning right. If the area is bordered by a broken white line, you should not enter the area unless it is necessary and you can see that it is safe to do so.
What do the zig zag road markings mean?
The unusual markings, the result of a pilot project from the Virginia Department of Transportation, are meant to alert drivers to be cautious where the Washington and Old Dominion (W&OD) Trail intersects with the road — and bicyclists and pedestrians frequently cross.
What are the white lines in the road for?
Solid white lines define lanes of traffic going in the same direction, or they show you the location of the shoulder of the road. Broken or “dotted” white lines are used to show the center line between lanes. Yellow lines show you where traffic is going in different directions.
Can you turn across double white lines?
Under NSW road rules, you can cross a dividing line to enter or leave a property or road “by the shortest route”. This rule applies to both double and single unbroken road markings. Drivers are also permitted to cross any type of dividing line when turning right at an intersection.
Can you pass on a solid line?
Solid yellow lines, single or double, indicate that passing is not permitted. Broken yellow lines indicate that passing is permitted. Be sure that the lane is clear and the pass can be completed safely. Passing is not permitted for the driver with the solid yellow line on their side of the roadway.