Do sectional views show cutting planes?
As in all sectional drawings, the cutting plane take precedence over the center line. This manufacturer’s drawing, using both full and half section, illustrates the advantages of sectional views. The different line directions indicate different parts and materials used in the assembly of this valve.
How do you represent a sectioned surface on a drawing?
A sectioned surface is represented by drawing thick lines at angle 45° to the drawing on the sectioned surface, (this is done with the use of a tee square and 45° set square when drawn on a t board).
What is phantom line?
Phantom lines are long-short-short-long lines most often used to show the travel or movement of an object or a part in alternate positions. It can also be used to show adjacent objects or features. Border Line.
How do you draw elevation from floor plan by hand?
Step by Step Guide to Drawing House Elevations
- Using your floor plan drawings and starting at the extreme left end of any walls on this side of the house on the ground floor, measure the horizontal distance of this wall.
- Draw a faint line the same length of this wall towards the bottom left third of your page.
What is a section elevation?
A sectional elevation is a combination of a cross section, with elevations of other parts of the building seen beyond the section plane. Geometrically, a cross section is a horizontal orthographic projection of a building on to a vertical plane, with the vertical plane cutting through the building.
What type of construction drawings shows property lines?
The most common construction plans are plot plans (also called site plans), foundation plans, floor plans, and framing plans. A plot plan shows the contours, boundaries, roads, utilities, trees, structures, and other significant physical features on their sites.
What indicates the location of the building on the property?
Cards
| Term Distances on property lines should be represented how? | Definition 169.00′ |
|---|---|
| Term The drawing that shows the location of a building on the property is a/an: | Definition Site plan. |
| Term Which line type would be used to indicate the property line? | Definition Phantom |
What does a vertical line represent in a construction?
Vertical lines are strong and rigid. They can suggest stability, especially when thicker. Vertical lines accentuate height and convey a lack of movement, which is usually seen as horizontal.
Is a dashed line on a plan showing an object obstructed from view by another object?
Hidden line: A dashed line showing an object obstructed from view by another object. Isometric drawing: A type of three-dimensional drawing of an object.
Which of the following is not one of the types of lines found in the dimensioning of an object?
Which of the following is not one of the types of lines found in the dimensioning of an object? The correct answer is: Break. Each type of line in the standards has one, and only one, option for its appearance.
What is shown in the plan view of a structural drawing?
The structural plan drawings show the foundation, floor, and roof plan of the building. These plans provide information like size and location of the structural elements present in the respective plans. Elevations show the exterior walls of a building or structure.
Which view shows the height of the side of a building?
elevation drawing
When the metric system is used dimensions are written in?
When the metric system is used, dimensions are written in: Meters, centimeters, and millimeters. If the scale on a site plan reads SCALE: 1inch = 20′-0″, then every: Inch on the drawing represents 20 feet, 0 inches.
What are plan drawings?
Plan drawings are a specific type of drawing architects use to illustrate a building or portion of a building. A plan is drawn from a horizontal plane looking down from above. This is as if you sliced through a space horizontally and stood over looking down on it.
What are the different types of drawings?
Different Kinds of Drawing
- Illustration Drawing. These are drawings that are created to represent the lay-out of a particular document.
- Life Drawing. Drawings that result from direct or real observations are life drawings.
- Emotive Drawing.
- Analytic Drawing.
- Perspective Drawing.
- Diagrammatic Drawing.
- Geometric Drawing.
What are the types of drawings in construction?
Below are the different types of construction drawings.
- 1 Architectural Drawings: This is one of the types of construction drawings.
- Structural Drawings:
- Electrical Drawings:
- Plumbing and Sanitary Drawings:
- Finishing Drawing:
What are the main parts of construction documents?
The Construction Documents contain contract forms, conditions of the contract, specifications, and drawings.
How many types of structural drawings are there?
four different types
What are the types of structural design?
- One-dimensional: Ropes, cables, struts, columns, beams, arches.
- Two-dimensional: Membranes, plates, slabs, shells, vaults, domes, synclastic, anticlastic.
- Three-dimensional: Solid masses.
- Composite. A combination of the above.
How many types of piping drawings are there?
Views in Piping Drawings. There are two types of views in hand-drawn piping drawings: Orthographic – Plans and Elevations. Pictorial – Isometric Views.