What is diathermy used to treat?

What is diathermy used to treat?

Diathermy are treatments that deliver energy to treat specific areas of the body. These treatments are typically used for the following purposes: Relieve pain, stiffness and muscle spasms. Reduce joint contractures.

Why is short wave diathermy banned?

Exposure to RF radiation can result in effects that are benign, beneficial (e.g., short-wave diathermy treatment) or potentially harmful. The brief review that follows is limited to effects that are potentially harmful, and against which protection is sought through adherence to exposure standards.

What are the effects of diathermy?

The primary physiological effects and benefits of using diathermy include: increased circulation and blood flow, increased metabolism, increased muscle temperature, increased tissue temperature, decreased pain, decreased tissue stiffness and muscle spasm relaxation.

Is diathermy a radiation?

Abstract. Short-wave diathermy (SWD), a form of radiofrequency radiation used therapeutically by physiotherapists, may be applied in continuous (CSWD) or pulsed (PSWD) mode using either capacitive or inductive methods.

What is IFT in physiotherapy?

Interferential Therapy or (IFT) is a type of electrotherapy treatments that use electric currents to stimulate tissue which provides pain relief, reduction of swelling and many other health benefits.

What is the function of IFT?

IFT is widely used for pain relief, muscle stimulation, increased local blood flow and reduction of oedema. This therapy has been studied extensively and its effective relief of pain in musculoskeletal conditions has been reported.

How do you use IFT in physiotherapy?

Whereas TENS Units delivers periodic electric pulses to stimulate surface nerves and block the pain signal, IFT Physiotherapy Equipment transmits a continuous stimulation deep into the affected tissue thereby blocking the pain signals and reducing swelling and inflammation which causes pain.

What is IFT position?

IFT stands for Interferential Therapy where two medium frequency current interferes to produce a beat frequency to give soothing and pain-relieving effect on the part where it is applied. It is very helpful in relieving pain due to muscle spasm various other kinds of pain.

How does interferential current work?

Interferential current therapy works by sending small amounts of electrical stimulation to damaged tissues in the body. The therapy is meant to boost the body’s natural process for responding to pain, increase blood flow and the production of hormones that promote healing.

What is interferential treatment?

Interferential therapy is the application of low frequency electrical current to stimulate nerve activity. This is designed to give you pain relief and increase blood flow to the injured area of your body.

What does interferential mean?

1. a. The act or an instance of hindering, obstructing, or impeding. b. Something that hinders, obstructs, or impedes.

What is interferential machine?

Interferential current (IFC) therapy is a therapeutic modality that is used often in an orthopedic physical therapy setting. This machine produces electrical currents (~4000HZ) that pass through the affected area of the patient.

What is interferential?

What is interferential? Interferential therapy is widely used by physiotherapists. It uses electrical current to reduce swelling, relieve pain and stimulate muscle. Interferential applies two different frequencies that interfere with one another to produce a medium frequency current within the tissues.

What is sweep in IFT?

SWEEP TIME PARAMETER sets the time period for the AMF to change from base to peak frequency. Faster sweep is used for less painful stimulation and for strong muscle contraction or sensory input, sweep must be slow, to ensure aggressive stimulation.

What is the difference between tens and IFT?

IFT uses the stimulation of the inferential electricity that concentrates at the intersection point of the electrodes while TENS stimulates the generation of current that can flow through its leads to electrodes that are placed on specific locations on the person’s skin.

What does IFC feel like?

It may sound intimidating, but IFC is safe and effective, and patients report it causes less discomfort than other forms of electrical stimulation, describing the feeling as a tingling or “pins and needles” sensation.

Can you cross the spine with IFC?

The most common electrode application method with IFC is a quadripolar set-up using four electrodes surrounding the painful area and crossing the channels. Electrodes can be placed lateral to the spinal process of the involved segmental level(s) or locally around the painful area.

What does IFC do physical therapy?

IFC is an electronic device used to stimulate nerve endings in deep tissue in order to reduce swelling, relieve pain, stop muscle spasms, increase blood flow and support healing. IFC is a technology used to treat many muscle, soft tissue and nerve diseases or injuries, such as: Rheumatoid arthritis.

Is IFC direct current?

Direct Current – constant flow of electrons for > 1 second without interruption with no change in polarity (+ or -) of the current. Pulsed Current – Interrupted flow of electrons of either AC or DC with periods of no electrical activity.

How can you generate interferential current?

Interferential current therapy is stimulation made by the interception of two electrical mediums of varying frequencies that work together to successfully stimulate large impulse fibers. These frequencies interfere with the pain transmission messages at the spinal cord level.

What type of current is IFC?

Interferential current therapy (IFC) is based on summation of 2 alternating current signals of slightly different frequency. The resultant current consists of a cyclical modulation of amplitude, based on the difference in frequency between the 2 signals.

How do I set up IFC?

You can customize the setup options when you export a project to IFC. In the Export IFC dialog, click Modify setup….

1. In the Modify Setup dialog, click (Create a new setup).
2. In the New export setup dialog, enter a name, and click OK.
3. Modify the options as desired on the tabs in the Modify Setup dialog.

What is the difference between Premod and IFC?

Premodulated Current, also referred to as “premod”, is similar in its benefits and ease of use for patients as interferential current. The main difference between the two is how the current is delivered to the patient’s muscle tissue.

What is an IFC unit?

IFC therapy is a form of electrotherapy that may be a good option for your patients looking to reduce inflammation but without painful side effects. Unfortunately, either of these scenarios can be frustrating both for you and your patients, and runs the risk of patients opting out of further treatment.

What is an IF unit?

It is a low frequency treatment that uses two medium frequency currents which “interfere” with each. The body produces frequency currents between 1-256 Hz. The major use of interferential therapy is to. This is a dual channel unit, which allows you to use up to four electrodes at a time (two electrodes.