What is process water?

What is process water?

Process water is broadly defined as water used in industry, manufacturing processes, power generation and similar applications. .

Is process water pure?

Distilled water is produced by a process of distillation. Distillation involves boiling the water and then condensing the vapor into a clean container, leaving solid contaminants behind. Distillation produces very pure water.

What are the three source of water?

Answer. The main sources of water are surface water, groundwater and rainwater.

What are the natural source of water?

There are two main sources of water: surface water and groundwater. Surface Water is found in lakes, rivers, and reservoirs. Groundwater lies under the surface of the land, where it travels through and fills openings in the rocks. The rocks that store and transmit groundwater are called aquifers.

What is the main source of water harvesting?

rainwater

What are the two main techniques of rainwater harvesting?

Broadly there are two ways of harvesting rainwater, namely; surface runoff harvesting and rooftop rainwater harvesting. Rainwater harvesting is the collection and storage of rain for reuse on-site, rather than allowing it to run off.

What is water harvesting with diagram?

Rainwater harvesting puts the supply of water back to normal levels. It is the collection and storage of water from surfaces that rain has fallen upon. Rainwater harvesting is an innovative technique utilized to harvest rainwater from roofs and other above surfaces to be stored for later use.

What is the main source of rainfall?

The major cause of rain production is moisture moving along three-dimensional zones of temperature and moisture contrasts known as weather fronts.

What is called water harvesting?

Definition. Rain water harvesting is a technique of collection and storage of rain water in surface (storage tanks) or sub surface aquifer before it is lost as surface runoff.

What are the steps of rainwater harvesting?

Five Steps of Rainwater Harvesting

1. Direct: Establish gutters and direction to guide and capture your rooftop water.
2. Capture: A downspout, debris/leafeater/filter and overflow system should be installed at each catchment base.
3. Collect: A cistern or storage tank can be as simple as a 50-gallon rain barrel to a more complex array of tanks.

What are different types of rainwater harvesting?

7 Different Types Of Rainwater Harvesting Systems

• Water Butt. One of the most basic types of rainwater harvesting systems; water Butt collects rainwater in a container from natural rainfall and/or drain pipes.
• Direct-Pumped.
• Indirect Pumped.
• Indirect Gravity.
• Gravity Only.
• Retention Ponds.
• In-Ground Storage.