How far will a 50 watt FM transmitter reach?

How far will a 50 watt FM transmitter reach?

If 50 Watt ERP is used, it’s very likely that 20 miles of range will be achieved. This is because 50 Watt ERP is ample power to propagate a strong signal 20 miles. If 1 Million Watts of power is used, it is very likely that signal will only propagate just over 20 miles.

How far will a .5 watt FM transmitter go?

Incase of the transmitting antenna height is 30 meters and the receiving antenna height is 6 meters, the maximum transmission range is 32.66 kilometers. If the distance is longer than 32.66 kilometers, reception radio signals is impossible due to earth curvature blocks the line of sight path.

How far will a FM transmitter go?

approximately 200 feet

How far will a 1 watt FM transmitter reach?

Because of the way propagation works at those frequencies, a one-watt signal can travel many hundres or even thousands of miles.

How do I change the frequency of my FM transmitter?

Thanks for your question:

1. Long press the multifunction key until the LED display flashing.
2. Choose channel in the car audio.
3. Adjust the FM transmitter frequency to match the car radio FM channel.
4. Connect phone bluetooth or insert the USB/TF card, FM Transmitter will start to play automatically.

Why is FM transmitter not working?

POWER: If the FM Transmitter does not turn on, then test it in another vehicle, if possible. If it works as expected in the other vehicle, then the issue is most likely with your vehicle’s power port. If it fails to work as expected in the other vehicle, then check to see if the fuse in the FM Transmitter has blown.

How do I reset my FM transmitter?

Press and hold FM button to turn on FM transmitter. Clear Bluetooth device list. Press and hold both Volume Down and Power buttons for 5 seconds. Reset to factory default condition (and clears preferred FM stations) Press and hold both Volume Up and Power buttons for 5 seconds.

How do I know if my FM transmitter is working?

Testing the FM Transmitter: Therefore, a field strength meter is used to test the output of the FM transmitter. A field strength meter shows the strength of the actual field being radiated from your antenna.

How do I reset my Scosche FM transmitter?

Turn the speaker off and back on. Also question is, how do you reset a scosche? Reset Device: Hold the MFB button for 10 seconds.