How does a motor operate?

How does a motor operate?

Electric motors work by converting electrical energy to mechanical energy in order to create motion. Force is generated within the motor through the interaction between a magnetic field and winding alternating (AC) or direct (DC) current.

How do I select a motor for an application?

5 steps to choose the best motor for your application

1. Step 1: Know the load characteristics.
2. Step 2: Get a handle on horsepower.
3. Step 3: Getting started.
4. Step 4: Adjust for duty cycle.
5. Step 5: The last consideration, motor hypoxia.

What size electric motor do I need?

General rule of thumb: you need at least 2 lbs. of thrust for every 100 lbs. of fully-loaded boat weight (people and gear included). If things like wind or current are major factors where you fish, you’ll want a little extra thrust.

Are electric boat motors any good?

While trolling motors are only good for slow speeds, an electric outboard motor can get a boat going fast as long as the boat is small enough. Electric outboard motors can be a better choice than gas motors. As well as being powerful enough, they are lighter, more compact, and more reliable.

How long do electric boat motors last?

One motor might last 10 years for one owner with his usage, and another motor might last 3 months with his mode of usage and amount of usage before parts are required. Minkman, Since your motor will not turn if it is turning 1/2 speed or less, be sure to check the mounts and the bushings for the motor.

Can you run a trolling motor out of water?

Your motor is cooled by the water around it, while running it out of the water for a very short time would be OK, it would take a long time to drain the battery much running the motor out of the water with no load. Why risk damaging a very expensive TM to just drain the battery down.

Does a trolling motor need a circuit breaker?

If you are wondering whether installing a circuit breaker in your trolling motor is optional then, no. The Coast Guard requires that a circuit breaker or fuse must protect any ungrounded current-carrying conductor. Trivia: A tripped circuit breaker will prevent the current from passing onward.

Can you mount a trolling motor on the side of a boat?

Can you mount a trolling motor on the side of a boat? In some cases, the answer is yes. Depending on the type of boat and the type of trolling motor, you may be able to simply clamp it anywhere on the side of the boat. With other types of boats, you may have to create a custom mount for the trolling motor.

What side of the bow do you mount a trolling motor on?

Actually, if your boat has the trolling motor plug – mounted on the right side of the boat – it would be correct – if the motor were mounted on the left side of the boat. Yes, if the motor is stowed, the wire will run across the front of the boat.

What size trolling motor do I need for a 16 foot boat?

The rule of thumb is that larger motors require more battery capacity, and if you fish from dawn to dark with a boat of 16′ or longer, you’ll probably want 24V. Serious anglers who spend a lot of time on the water will appreciate a 36V motor.

Where is the best place to mount a trolling motor?

Off-Center Trolling Motor Installations If at all possible, you’ll want to mount your bow mount trolling motor so the shaft is positioned a close to the centerline of the boat as possible. This will ensure your steering isn’t offset and that your boat doesn’t drift to one side or the other.