How big are bass waves?
Low-pitch bass notes that humans can barely hear have huge wavelengths around 17 meters and frequencies around 20 hertz (Hz). Extremely high-pitched sounds that are on the other edge of the range that humans can hear have smaller wavelengths around 17 mm and frequencies around 20 kHz (kilohertz, or thousands of Hertz).
How long are bass frequencies?
Summary Table
| Frequency Range | Frequency Values |
|---|---|
| Sub-bass | 20 to 60 Hz |
| Bass | 60 to 250 Hz |
| Low midrange | 250 to 500 Hz |
| Midrange | 500 Hz to 2 kHz |
What DB should Bass be at?
Typically, without tons of compression the kick and bass and vocals should be hitting very close to 0dbFS. The snare about -3 to -6dbFS.
What dB should my 808 be at?
18 dBFS
What dB should your melodies be?
I recommend mixing at -23 dB LUFS, or having your peaks be between -18dB and -3dB. This will allow the mastering engineer the opportunity to process your song, without having to resort to turning it down.
How do you get a punchy bass?
This tutorial will share five tips you can use to achieve a punchy kick on every mix.
- Choose the right kick sample.
- Use EQ to fatten/tighten up the kick.
- Use Compression to make the kick punchy.
- Make Sure Your Kick Sample Is In Mono.
- Use Sidechain Compression To Give Space To Your Kick.
What is punchy bass?
Punchy- This means the bass is quick to play, and doesn’t linger too long in the sound field. It has good fast attack, and short decay. You might even feel the bass in different parts of your body, on a really thumpy pair.
How do I make my bass more punchy?
Re: How do I give the bass more punch and power?
- Gain staging.
- Counter-intuitively turn down the bass.
- EQ, also not on the fundamental region.
- Compression (Gentle!)
- Buss compression with the side-chain filtering out the bass.
- Parallel Compression.
- Make sub region mono as early in the signal path as possible.
Should you put reverb on a kick?
As a general rule of thumb, I keep the kick drum pretty dry. Especially on rhythmic dance tracks. However, there is definitely a time and place to putting reverb on a kick. First off, there’s no rule against filtering the lows out of the reverb and just using it to add a bit of flavor to the top end of the kick.