What is left hand thumb rule?

What is left hand thumb rule?

: a rule in electricity: if the thumb and first two fingers of the left hand are arranged at right angles to each other on a conductor and the hand oriented so that the first finger points in the direction of the magnetic field and the middle finger in the direction of the electric current then the thumb will point in …

Which quantity is Torque?

Just as force is what causes an object to accelerate in linear kinematics, torque is what causes an object to acquire angular acceleration. Torque is a vector quantity. The direction of the torque vector depends on the direction of the force on the axis.

How is car torque calculated?

The formula for figuring out torque is torque = horsepower of the engine x 5252, which is then divided by the RPMs. The problem with torque, however, is that it is measured in two different places: directly from the engine and to the drive wheels.

Is 400 ft lbs of torque a lot?

Having 400 pounds of torque down low means you have more horsepower down low. Having 400 pounds of torque up high means you have even more horsepower then you had down low.

Is more torque better in a car?

Horsepower means your car can go faster, and torque means…? Because there is generally a limit on how fast you can spin an engine, having higher torque allows for greater horsepower at lower rpms. This is also why people talk about “low-end torque” being important for better power at slower speeds.

How much torque is required to move a car?

All Answers (15) The required tractive torque of the motor shall be equal to the tractive torque at wheel, Tw = Ft. rw , (i.e. Tractive Torque = Tractive Force x mean wheel radius). So you must determine the acceleration required to reach you designed speed.

How much force is needed to move a car?

3) An applied force of 30 to 50 pounds per scale (total applied force of 90 to 150 pounds) usually works well. 4) Make certain students push horizontally. If they push at an angle, only the horizontal component of the applied force goes into accelerating the car.

How much torque is required to lift a weight?

To calculate load torque, multiply the force (F) by the distance away from the rotational axis, which is the radius of the pulley (r). If the mass of the load (blue box) is 20 Newtons, and the radius of the pulley is 5 cm away, then the required torque for the application is 20 N x 0.05 m = 1 Nm.

How do you calculate rpm torque?

1. Torque (lb.in) = 63,025 x Power (HP) / Speed (RPM)
2. Power (HP) = Torque (lb.in) x Speed (RPM) / 63,025.
3. Torque (N.m) = 9.5488 x Power (kW) / Speed (RPM)
4. Power (kW) = Torque (N.m) x Speed (RPM) / 9.5488.

What is motor torque formula?

As you see this equation torque is the product of the force and the distance between the force and the center of rotation. For example, if you want to hold the force acting on the end of pulley, T = F x r.

Is torque directly proportional to RPM?

Torque is directly proportional to the radius of rotation. Ans. True. Since torque is the product of force and radius of rotation, increasing this radius will also increase the resulting torque.

How do I calculate RPM?

Motor RPM Calculation Examples For a 60 Hz system with four poles, the calculations to determine RPM would be: (Hz x 60 x 2) / number of poles = no-load RPM. (60 x 60 x 2) / 4. 7,200 / 4 = 1,800 RPM.

What is 1 rpm?

Revolutions per minute (abbreviated rpm, RPM, rev/min, r/min, or with the notation min−1) is the number of turns in one minute. It is a unit of rotational speed or the frequency of rotation around a fixed axis.