How do you program a element TV?

How do you program a element TV?

INSTRUCTIONS FOR ELEMENT ANDROID TVs.

1. Press the HOME button.
2. Scroll down to the inputs section then select CHANNELS.
3. Press the menu button on the remote and move to TV options then select SETTINGS (last option).
4. Then go to Channel sources and choose CHANNELS. Lastly, choose AIR/CABLE and run AUTO-SCAN.

How do I reset my element TV?

How to Factory Reset an Element Smart TV

1. While the TV is on, press the Menu button on the remote.
2. Navigate to TV Settings then select General.
3. Select Restore Default.
4. Your TV will be reset to its factory default settings.

Does the element TV have a reset button?

To factory reset your Element TV without a remote, navigate a little hole on the left side of your TV. Inside the little hole is a reset button that has to be held for about 15-20 seconds when TV is ON. To reach the button inside the little gap, you can use an object with a small and sharp edge such as a pencil.

Why is the sound not working on my element TV?

A: Make sure the television is not muted. Check all cables to ensure they are firmly connected into the TV and your external AV source. After you have done so, check to see that the video input matches the sound input. Increase the volume on either the remote control or TV.

How do I fix the volume on my element TV?

How to Fix No Sound on an Element Smart TV

1. Push the Mute button on your TV remote. A display on screen should show if the TV is now muted, or not. You want to be sure the TV is not muted.
2. If that doesn’t work, try raising the volume on your TV.

How do I turn the volume down on my element TV?

Press the VOL+/- buttons on the main unit or on the remote control to adjust the volume. If you wish to switch the sound off, press and hold the VOL- button on your remote to 0.

Why do I have picture but no sound on my TV?

Check Connection Cables Sometimes plugging or unplugging can leave the connecting cables slightly loose or disconnected. It is also possible that you moved the TV which loosen the cables. This can result in no sound and you will just see the picture.

Why is there no sound on my TV HDMI?

If you’re using a set-top or cable box: Make sure the volume is turned up. You also may need to go into the set-top box menu and select HDMI in the Audio Settings or Audio Coding section to pass the audio to the TV. You may need an update to your set-top box firmware, or a newer set-top box from your service provider.