What is the TV code for Dynex?

What is the TV code for Dynex?

5 Digits Dynex Universal Remote Codes 10171, 10463, 10180, 10096, 10236, 10154, 11963, 10178, 10623, 10096,11864, 12270, 11665, 10030, 10028, 11314, 10005, 10065, 11931, 17342, 12270, 13207, 13811, 18212, 13700, 19617, 17627, 12284, 17464, 13811.

How do you program a universal remote to a Dynex TV?

Remote Control Codes For Dynex TVs

  1. how to program dynex TV with Universal remote control.
  2. Turn on the TV.
  3. Press and hold the TV and SEL buttons simultaneously for 3 seconds.
  4. With the button lit, point the remote at the TV and enter the TV’s 3, 4, or 5 digit code.
  5. Verify by pressing the VOLUME + button.

Is Dynex a universal remote?

1-1 of 1 Answer. Many third-party universal remote controls work with Dynex TVs. Dynex has employed the same code set since at least 2007, but bear in mind that not every universal remote is compatible with every product. For best results, a higher-end universal remote control may be needed.

What universal remotes work with Dynex?

Remote Control Codes For Dynex TVs

  • 5 digit remote codes for Dynex TV. 10463. 11463. 11780. 11785.
  • 4 digit remote codes for Dynex TV. 0490. 0463. 0783. 1944. 1250. 0464.

What remotes are compatible with Dynex TV?

Universal Replacement Remote Control Fit for DYNEX X55L150A11 DX-24LD230A12A DX-LCD1909 DX-24LD230A12 DX-LCD2609 DX-LCD32 DX-LDVD1910A DX-22L150A11 DX-22LD150A11 DX-LDVD2210AB Plasma LCD LED HDTV TV.

How do I program my Dynex TV without a remote?

On some Dynex TVs, there are control buttons on the side of the TV (Volume controls, Channel controls, Menu, Input and Power). Just press the Input button until you get to the correct source. will let you find your model and get a copy of the manual to check where those buttons are on your TV. I hope this helps.

Who is Dynex TV made by?

Magallen Technologies

What do you do when your remote doesn’t work?

NOTE: Because each of these steps represents a possible solution, check the function of the remote control after completing each step.

  1. Make sure none of the remote buttons are jammed.
  2. Reset the remote.
  3. Clean the remote control terminals.
  4. Replace with fresh batteries.
  5. Perform a power reset on the TV.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top