Why does my dishwasher say locked?
When the unit gets stuck in Lock mode, it’s often because one or more of the control buttons is stuck. There’s a simple strategy for resolving this problem, but if it doesn’t work, you may have to replace the control panel.
Why is my dishwasher stuck on dry cycle?
Timer. The dishwasher may be stuck in drying mode due to a defective timer. The timer ensures that electricity is distributed to different parts of the appliance as needed for each dishwashing cycle. However, if the dishwasher remains in the dryer mode, the timer may be the culprit.
Where is float switch on dishwasher?
Your float assembly is found inside the dishwasher’s tub, on the bottom. The water that fills your dishwasher lifts the float, and when it reaches a certain level, it acts as a trigger for the float switch. The float triggers the float switch to shut off, thereby shutting off the flow of water into the dishwasher.
Why did my dishwasher stop working?
A dishwasher that won’t stop filling may have a faulty float switch, a timer stuck on fill, or a water inlet valve that is stuck open. If your door isn’t properly closed, the dishwasher will not start. If your latch is fine, check the timer or electronic control, especially if your drain pump motor isn’t starting up.
Is there a fuse in a dishwasher?
Most dishwashers have the thermal fuse located in the control panel area. To determine if the thermal fuse is bad, remove the control panel, locate the fuse, and test it for continuity.
How do you know if a thermal fuse is bad?
How to tell if a thermal fuse has blown? To test if your thermal fuse has blown, touch the right side of your multimeter lead to the right side of the fuse, and repeat with the left multimeter lead. If the multimeter needle fails to move, this indicates the thermal fuse has blown. Learn about testing for a blown fuse.
Where are fuses on a dishwasher?
The thermal fuse is mounted on the control board housing. Push down the main release tab to release the fuse from the locking tabs. Pull the thermal fuse forward and out from under the other tabs. PHOTO: Release the locking tabs on the thermal fuse.
What size fuse does a dishwasher need?
13A Fuse
Do Bosch dishwashers have a fuse?
The thermal fuse shuts off power to the dishwasher if it overheats. If the thermal fuse blows, it will prevent the dishwasher from starting. To determine if the thermal fuse is defective, use a multimeter to test the fuse for continuity. If the thermal fuse does not have continuity, replace it.
Why is there no power to my Bosch dishwasher?
If there is no power to the dishwasher, the on/off button will not work. In addition, check your household’s fuse box to make sure a fuse has not been blown, which will prevent the on/off button from turning the dishwasher on. If your dishwasher repeatedly blows fuses, you may have to buy more powerful fuses.