Is it hard to change rear brakes?

Is it hard to change rear brakes?

While it might seem intimidating, changing your brake pads is a ridiculously easy process that nearly anyone can do with the right tools. Once you get used to doing it, you can replace your brake pads in an hour or so. Not to mention, you can save hundreds of dollars over the long run by doing the job yourself.

How do you change rear brakes?

Project step-by-step (11)

1. Remove the Rear Wheel. Start the process by placing wheel chocks in front of the front wheels.
2. Remove Bolts from Caliper Brackets.
3. Remove the Brake Pads.
4. Reattach Caliper Bracket.
5. Seat the New Brake Pads.
6. Remount Wheel.
7. A Note on Safety.

Why would rear brake pads wear faster?

Your rear disk brakes wear out faster, because your brakes, when applied, are designed to apply the front brakes first, then the rear brakes get applied for more stopping power. Because you use your rear brake much more often than your front.

How long does it take to change rear brake pads?

Usually, changing a set of brake pads takes approximately 30 minutes to an hour. If you have a professional complete the work, expect to pay for about an hour’s worth of labor.

How many miles should brakes last?

Average brake life runs between 25,000 and 65,000 miles, though some people will have brake pads last beyond 80,000 miles. While it’s impossible to give an exact number, the 40,000-mile range is the general mileage to keep in mind when planning for vehicle maintenance.

Can I change my own brakes?

You will be pleasantly surprised to find that you can change your car’s disc brake pads quickly, easily and without specialized tools. Doing it yourself also will save you a lot of money. Note: If the front end of the car vibrates when you apply the brakes, your brake rotors may be warped.

Is it dangerous to change your own brakes?

Risks. There are more serious risks when working on your own brakes. You can be injured while working with heavy or complex parts, can injure your hands trying to reach hard-to-locate parts, and can even put yourself in danger once you start driving again.

How much does it cost to change brakes at Jiffy Lube?

$179 for a Full Brake Replacement Package per Axle at Jiffy Lube ($365 Value)

How often should you change your brakes?

As a general rule, you should get your brake pads replaced every 10,000 to 20,000 miles to keep wear to a minimum. When it comes to your rotors, you have a bit longer. Your rotors should be replaced between 50,000 and 70,000 miles to keep your brakes in peak health.

What happens if you wait too long to change your brakes?

But the longer you wait, the more damage they can do. If you take your vehicle in right away, you might just need to replace brake pads. If you wait, the damage can continue into bigger, more expensive parts of your brakes.

Which brakes wear out first?

Your front brake pads will also wear down faster than your rear pads. The front of your vehicle handles a lot more weight transfer as you brake, causing more wear. Over time heat and friction also contribute to brake pad wear.

How do I know if my brake pads are worn out?

If your brake pads are worn you may experience screeching while braking, heavy vibrating or your car pulling to one side as you press down on the brake pedal. You may also find it takes longer than usual for your brakes to slow your car down. A warning light will also help flag any problems with wear and tear.

What happens if I don’t change my brake pads?

This can cause the rotor to warp or break. Second, the lack of brake pads means the heat from the friction won’t disperse correctly, which could cause the whole braking system to overheat and fail. It can cost up to $289 to resurface the rotors and up to $485 if you replace the brake pads at the same time.