What is the bolt pattern on a 2010 Dodge Charger SXT?

What is the bolt pattern on a 2010 Dodge Charger SXT?

5 x 114.3Mm

Is positive or negative offset better?

As a general rule of thumb, most front wheel drive vehicles have a positive offset. If you want to put wider wheels on your vehicle than OEM, you generally need to reduce the offset. By reducing the offset, you bring the wheel a bit more inward, so it doesn’t extend out too far and muck up the way the vehicle handles.

What offset do I need for tires to stick out?

When bolted up to your car this means that a lower offset wheel will stick out farther. If your car was originally equipped with a +50mm offset and you replace it with a +25mm wheel, the wheel will stick out approximately one inch farther. Obviously, a negative offset works the same way.

How much wheel offset is ok?

In summary, here are a few important points to remember about wheel offset. If the new wheels are the same width, the new offset should ideally be within 5mm of the old offset in either direction. If offset must be substantially different, avoid using more positive offset at all costs.

Does positive offset stick out more?

The more positive offset you have the further the wheel is going to be in from the fender. The more negative offset you have the further the wheel is going to stick out. Zero offset is your center line.

Does offset affect tire size?

Offset is the distance between the mounting pad and rim’s midpoint. The diagram to the right shows a wheel with a positive offset. A higher offset results in the wheel and tire moving more in (towards the hub). A lower offset causes the wheel and tire to move out (towards the fender).

Does negative offset stick out?

Negative Offset The wheel will also stick out from the truck. Keep in mind that some states require fender flares to cover the width of the wheel and tire.

How far will offset stick out?

Well-Known Member. Yup.. – 12 offset. Sticks out sbout an inch.