What color coolant does Dodge Ram use?

What color coolant does Dodge Ram use?

What color coolant does 2019 RAM 1500 use? It’s critical to understand that color doesn’t matter. While most Organic Acid Technology (OAT) coolants are usually orange, yellow, red or purple, Hybrid Organic Acid Technology (HOAT) coolants are orange and yellow.

What kind of antifreeze does a 2004 Dodge Ram 1500 take?

Prestone yellow

What kind of antifreeze does a 2003 Dodge Ram 1500 take?

The 2003 Dodge Ram 1500 uses ZereX1 Gallon Yellow 50/50 Coolant/Antifreeze. If You need to do a coolant change on the vehicle then You will first need to open the hood and find the radiator.

How do you flush the radiator on a Dodge Ram 1500?

  1. Step 1 – Remove radiator cap. Park on a leveled ground, open the hood, and remove the radiator cap.
  2. Step 2 – Drain the old coolant. Locate the radiator’s drain valve on the bottom of the radiator.
  3. Step 3 – Fill radiator with distilled water.
  4. Step 4 – Fill radiator with new coolant.
  5. Step 5 – Start the engine.

How do you add coolant to a Dodge Ram 1500?

How to Add Coolant: Ram 1500 (2011-2018)

  1. Getting Started – Prepare for the repair.
  2. Open the Hood – How to pop the hood and prop it open.
  3. Find Reservoir – Locate the coolant reservoir and clean it.
  4. Check Level – Determine the coolant level.
  5. Add Coolant – Determine coolant type and add fluid properly.

How do you flush the radiator on a 2001 Dodge Ram 1500?

  1. Step 1 – Disconnect battery.
  2. Step 2 – Remove radiator cap.
  3. Step 3 – Install the flushing kit according to label directions.
  4. Step 4 – Attach water supply to back flow valve.
  5. Step 5 – Remove lower radiator hose and flush the old fluid.
  6. Step 6 – Flush the heater core.
  7. Step 7 – Remove the flushing kit components.

How do you drain the coolant reservoir on a Dodge Ram?

How do you drain the radiator on a Dodge Ram?

  1. Park your Dodge Ram on a level surface and set the parking brake.
  2. Open the hood and make sure the radiator is cool.
  3. Push down and turn the radiator cap a half turn to relieve any remaining pressure, wait a few seconds and remove the cap.

How much is a coolant flush at Dodge?

The average cost for a Dodge Ram 1500 coolant change is between $53 and $67. Labor costs are estimated between $53 and $67. This range is based on the number and age of Dodge Ram 1500’s on the road.

How much antifreeze does a Dodge Dakota hold?

(1) Includes 0.9L (1.0 quarts) for coolant reservoir. (2) If equipped with Trac-lok add 0.25 pints (118mL) of Limited Slip Additive. (3) Dry fill capacity depending on type and size of internal cooler, length and inside diameter of cooler lines, or use of an auxiliary cooler, these figures may vary.

How many gallons of antifreeze does a 97 Dodge Dakota take?

Standard : 15 Gal. Optional : 22 Gal.

How many gallons of antifreeze does a 1998 Dodge Dakota take?

2 gal of antifreeze added to your system.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top