What does band adjustment do?
Transmission Band Adjustments As the band tightens around the drum, transmission fluid is squeezed out into grooves cut into the band’s surface. The band brings the drum to a stop and holds it there. When the friction material on the inside surface of the band becomes worn, the gripping ability is affected.
How do you tighten the bands on a 47re?
Locate the front band adjustment screw on the driver side of the transmission just forward of the transmission range selector linkage. Loosen the locknut using a 3/4″ socket and back off 3 to 5 turns. Tighten the adjustment screw by rotating it clockwise with a 5/16″ square drive socket.
Can automatic transmissions be adjusted?
The technicians at All-Automatic Transmissions understand that problems with your vehicle’s transmission can often be resolved with adjustments or a minor repair. In fact, a simple adjustment can be done without even removing the transmission from the vehicle.
What is a 48RE transmission?
48RE Transmission and HD Torque Converter. The 48RE is a 4 speed automatic transmission, it was manufactured between the years 2002 to 2010. It was a direct replacement for the Dodge Ram 2500 and 3500 series trucks. The 48RE was primarily used 5.9 diesel engine.
How much is a new 48RE transmission?
48RE Transmission – $2,495 | 5-Year Warranty.
What vehicles have a 48RE transmission?
Chrysler 48RE Specs
| Transmission: | Chrysler 48RE |
|---|---|
| Predecessor: | 47RE |
| Model Years/Applications: | 2003 – 2007 Dodge Ram 2500/3500 |
| Case Material: | Aluminum |
| Max Input Torque: | 560 – 570 lb-ft (Chrysler strength designation “8”) |
Are Dodge transmissions good?
They are extremely reliable and well build. Not only can they handle the high horsepower and torque loads, but they are also more efficient than any other transmission Dodge/Chrysler manufactured in the past. Overall the ZF 8HP transmission is known to go over well over 150,000 miles without any major problem.
How can you tell a 48re?
Look for the serial number on the left side of the transmission case, just above the oil pan gasket surface. The dealer should be able to confirm from that, what transmission you have. If you paid for a 48re, and you have a 47re, tell them to replace the transmission. Hope this helps.
What transmission is in a 24 valve Cummins?
The High Output 24V 5.9L Cummins comes with a 6-speed manual transmission. This is slightly different than what we’ve seen Ram do in current times. Manual transmissions are much less capable than Aisin automatic transmissions or even the standard 68RFE.