What type of oil does a Dodge Caravan take?

What type of oil does a Dodge Caravan take?

Dodge Grand Caravan engine oil 5w-20 For new Dodge Grand Caravan cars, for cars with less than 75,000 miles, we recommend to use engine oil viscosity 5w-20, API SN, API SP specification.

What kind of oil does a 1995 Dodge Dakota take?

Engine Oil SAE 10W-30 is preferred. Capacity: 4 quarts. (with filter)After refill check oil level.

How many quarts of oil does a Dodge Caravan need?

5.9 quarts

What kind of oil does a 2011 Dodge Grand Caravan take?

Castrol Edge Synthetic Motor Oil 5W-30 5 Quart.

What type of oil does a 2010 Chrysler Town and Country use?

SAE 5W-20 Full Synthetic Motor Oil

What kind of oil does my Chrysler Town and Country use?

The 4.0L Chrysler Town & Country engine should specifically use a Chrysler MS-6395 oil specification and an oil viscosity of SAE 10W-30.

What kind of oil does a 2011 Chrysler Town and Country use?

Castrol – EDGE® 5W-30 Full Synthetic Motor Oil 5 Quart (Part No. 1598B1)

How many quarts of oil does a Chrysler town and country take?

The Chrysler Town & Country with a 3.8L 6-cyl engine takes 5 quarts (with filter) of 5W-20 synthetic oil. A new oil filter and a crush washer are required.

How much oil does a 3.8 L v6 take?

Engine Oil 5 quarts. (with filter)After refill check oil level.

What kind of oil does a 2007 Chrysler Town and Country take?

Mobil 1 Advanced Synthetic Motor Oil 5W-20 5 Quart.

How many quarts of oil does a 2000 Chrysler Town and Country take?

4.2 quarts

How many quarts of oil does a 2001 Town and Country take?

5 quarts

What kind of oil does a 2008 Chrysler Town and Country use?

Mobil 1 Extended Performance Synthetic Motor Oil 5W-20 5 Quart.

How much transmission fluid does a 2008 Chrysler Town and Country need?

There are two transmissions that are listed for the 2008 Chrysler Town and Country. 62TE – Requires 5.5 quarts for a drain(drop the pan) and refill. 41TE – Requires 4 quarts for a drain(drop the pan) and refill. Once complete, check the transmission fluid level.

How much transmission fluid does a Chrysler town and country need?

A typical fluid change will require anywhere from 3 to 6 quarts of ATF depending on the application, a new filter and a pan gasket (or RTV sealer) for the transmission pan. The pan must be thoroughly cleaned prior to reinstallation.