What is plan and elevation in drawing?

Plan, Section, and Elevation are different types of drawings used by architects to graphically represent a building design and construction. A plan drawing is a drawing on a horizontal plane showing a view from above. An Elevation drawing is drawn on a vertical plane showing a vertical depiction.

What are elevations in construction drawings?

Geometrically, an elevation is a horizontal orthographic projection of a building onto a vertical plane, the vertical plane normally being parallel to one side of the building. Architects also use the word elevation as a synonym for façade, so the “north elevation” is the north-facing wall of the building.

How do you explain elevation drawings?

An elevation drawing is a view of a building seen from one side. It is the two dimensional, flat, representation of one facade. It displays heights of key features of the development in relation to a fixed point such as natural ground level.

What are elevations on blueprints?

So what is an elevation? In simpler terms, an elevation is a drawing which shows any particular side of a house. If the floor plans are like looking down at a house without a roof, the elevation is like looking at it from the side.

What are the two types of elevation plans?

Front elevation, side elevations, rear elevations and split elevations are some types. On a building plan there are normally four or five elevations , showing a front, rear and end elevation , these would include any basement or attic rooms . The plan elevation would show the upper and lower floor room layouts .

What are the basic types of elevation?

Front Elevation (or Approach view/elevation)
Left Elevation (or Left view)
Right Elevation (or Right view)
Back Elevation (or Back/Rear view)
Sectional Elevations.

What is difference between section and elevation?

The difference between Interior Elevations and Sections is that Interior Elevations start at the finished floor elevation and stop at the ceiling. Interior Elevations show individual walls in specific rooms, whereas Sections cut through floors showing multiple rooms stacked on top of each other.

What is the importance of elevation plan?

An elevation drawing is an orthographic projection drawing that shows one side of the house. The purpose of an elevation drawing is to show the finished appearance of a given side of the house and furnish vertical height dimensions. Four elevations are customarily drawn, one for each side of the house.

Why is it important to draw a plan section and elevation?

Sectional elevations. These drawings not only show the cut, they also show the features beyond the cut, usually drawn in thinner lines, to help viewers understand the volumes in the foreground against the other volumes beyond.

How does Sciography add value to the plan of the building?

Sciography is the study of shade and shadow in architecture….The purpose of shades and shadows in the rendition of site plans is threefold:

To indicate the height of masses above the ground plane.
To provide a contrast in value to emphasize the building form.
To indicate significant changes in topography.

What is the difference between plans and drawings?

is that drawing is a picture, likeness, diagram or representation, usually drawn on paper while plan is a drawing showing technical details of a building, machine, etc, with unwanted details omitted, and often using symbols rather than detailed drawing to represent doors, valves, etc.

Do I need drawings for permitted development?

A permitted development application must be accompanied by scaled architectural drawings which clearly outline the existing property and proposed development.

What drawings do you need for planning?

The plans, questionnaire and ownership certificate will be required, three types of plan drawings are required:

The location plan.
The Block Plan (sometimes referred to a the site plan)
The floor plans and elevation.