How long does a brother drum unit last?

How long does a brother drum unit last?

On average, a Brother drum will last as long as 3-4 Brother toner cartridges, so eventually over time you’ll have to replace the drum to make sure you get high quality prints consistently. If you see blank spaces, missing areas and streaking it probably means the Brother drum needs to be replaced.

When should I replace my brother drum?

The Brother machine will display a ‘Replace Drum’ or ‘Drum Stop’ message when the machine has printed approximately 15,000 pages. The drums should be replaced as a set in order to maintain print quality. Unlike the toner cartridges, the drum change is not automatically detected by the machine when they are replaced.

How often does a printer drum need to be replaced?

Over time, the drum unit deteriorates and eventually needs to be replaced. Drum units typically last for 10,000 to 50,000 printed pages, depending on the quality of the printer and unit. Your printer will exhibit warning signs of the drum unit’s deterioration so you can replace it before it stops working.

What is the difference between a drum and toner?

In short, the toner cartridge is a container that contains the toner powder, whereas the drum unit is an electrically charged cylinder that transfers the powder onto paper.

Can you clean a laser printer drum?

You can use a clean, lint-free cloth instead, but a toner cloth is ideal. Wipe down the exterior of the drum to remove loose toner.

Do Brother printers come with drum?

Brother Toners and Drum Units Come Separate. Some printers, like most Brother laser printer models, use a separate toner and drum unit. Your printer should inform you when it’s time to replace the drum, but you can usually tell your drum is on it’s last legs if you start to see black spots or lines across the page.

How do you fix a drum on a Brother printer?

Make sure that the printer is on and open the front cover. Remove the toner cartridge and drum unit from the machine. Push down the green lock lever and remove the toner cartridge from the drum unit….Once the new drum is replaced, you will need to reset the drum counter.

1. Replace Drum.
2. Drum End Soon.
3. Drum Stop.

How do you check the drum life on a Brother printer?

Can I check the remaining life of my Brother machine’s drum?

1. Press MENU and choose Machine Info. => Drum Life.
2. Press the OK key. Your Brother machine’s LCD will display the percentage of remaining drum life.
3. Press the STOP/EXIT key.

How do I clear my Drum End Soon message?

How do I clear the message ‘ Drum End Soon ‘ from the display?

1. Open the front cover.
2. Press the CLEAR key.
3. Press the UP ARROW key to select YES.
4. Close the front cover.
5. Confirm the display or status monitor message is no longer there.

Why do laser printer drums wear out?

Wear. To make it sensitive to a laser, the printer drum is covered with photosensitive material. Over time, the photosensitivity is simply worn out by repeated charging and discharging.