How much does it cost to install drywall per square foot?
The cost to install drywall is about $2 per square foot. After material and labor are added in, the cost per panel ranges from $60 to $90. A typical 12 by 12 foot room, for example, will use 18 panels. This would put the cost somewhere between $1,000 and $1,600.
How much does it cost per sheet to hang drywall?
Drywall installation: 1,000 square feet of drywall, labor costs, and other potential charges….Drywall Installation Costs.
| Item | Unit Cost | Cost |
|---|---|---|
| Standard ½” drywall | $10-$20 per sheet | $320-$640 |
| Moisture/Mold resistant drywall | $13-$25 per sheet | $416-$800 |
What is the going rate for drywall finishing?
The national average for the cost to finish drywall starts around $1,000 and goes up to $3,000. During a remodel, you can expect to spend Around $1,800 to use a standard ½-inch drywall to finish a 1,000-square foot room.
How much does it cost to drywall 1000 square feet?
For this reason, drywall installation has a range of associated costs. The national average cost to install drywall is between $1,500 and $2,000, with most homeowners spending around $1,750 on 1,000 sq. ft. of standard ½” drywall, hung and finished in a remodel.
How much does it cost to drywall 1500 square feet?
Our page on Average Drywall Installation Cost & Prices shows that the cost to drywall a house per square foot is roughly $1.30 – $4.00 per square foot….
| Average Cost to Drywall a House by House Size | |
|---|---|
| Cost to Drywall a 1000 sq ft House | Total Cost |
| Average x 4140 | $9,150 |
| High x 4700 | $14,800 |
| Cost to Drywall a 1500 sq ft House | |
Are Drywall prices increasing?
Over the past three months, prices have climbed 22.0%. The PPI for all gypsum products has increased 6.3% over the past 12 months while the index for gypsum building materials (e.g., drywall) is up 6.6%. Prices paid for ready-mix concrete (RMC) climbed 0.2% (seasonally adjusted), following a 0.3% increase in February.
Is sheetrock the same as drywall?
Drywall is a flat panel made of gypsum plaster sandwiched in between two sheets of thick paper. It adheres to metal or wood studs using nails or screws. Sheetrock is a specific brand of drywall sheet. These terms are often used interchangeably.