How do I use Star TSP100?

The TSP100 futurePRNT is the first USB only receipt printer on the market today….Connect an iPad POS Register to your Printer

In your POS register, open the menu button and click/tap Settings.
Click/tap Printer and Cash Drawer.
Click/tap the Star TSP printer in your list of network printers.
Click/tap Done.

Is the star TSP100 Bluetooth?

Connect your printer to a power supply. Open the iPad’s Settings. Tap the Bluetooth menu option. Find the Star Micronics printer in the Other devices list, with a name like TSP100-XXXXX.

How do I find my IP address on Star TSP100?

Finding the printer’s IP address

Turn off the Star printer.
Press and hold the feed button.
Turn the printer back on.
Continue to hold the feed button until the Network Configuration report prints out.
Confirm the printer IP address. An example IP address would be: 192.168.1.73.

How do I connect my TSP100III to my computer?

Connect by WPS

Check the printer’s power is on, and open TSP100III Utility.
Tap [Unselected State] from “Selected Device”.
From the Select Device list , select the device you want to connect and then tap [Apply].
Tap [Change Network Settings]. This connects to the selected printer and opens the Web Configuration.

What does no host connection mean?

No Host connection or not obtaining an IP address can occur for many reasons. Some common causes of the issue are: The printer is not physically connected to the network. An ethernet cable or network device is defective. The network is having trouble communicating with the printer due to configuration issues.

How do I connect my star printer?

How to connect the Star printer to iOS and Android tablets

Plug the printer in a 220V socket and turn it on with the power button.
Insert the till roll in the printer and pull out its loose end.
Connect the printer:
Connect the tablet to the same Wi-Fi network the printer is connected to.

How do I connect my Star printer to Bluetooth?

Steps:

Connect your printer to the power supply.
Tap the Settings icon on your iPad, then tap the Bluetooth menu option. You should see the Star Micronics printer in the DEVICES list. The printer’s status is Not Paired.

How do I install Star TSP650?

How to Install Star Printer Driver on Windows 10

Plug in the Star printer (Power and USB)
Turn the Star printer on and ignore/cancel any popup messages on the computer screen.
Download the Star printer driver here. -Click the link to download and then extract the folder to the desktop.

How do I connect my star TSP650 to my computer?

Set up Star Printer TSP650 for Windows

Step 1: Download Star Utility.
Step 2: Install the Star driver.
Step 3: Connect to PC.
Step 4: Set the Printer to Default Printer.

How do I print to a star printer?

Open Devices and Printer, then right-click on the “TSP100 Cutter (TSP143)” and select Printer Properties. Click Print Test Page in the lower right-hand corner. The printer will print out a Windows Test Page, confirming successful installation. Click OK button to close the Star TSP100 Cutter properties windows.

What color setting is the most common to print out a document?

Black is the most-used toner color in computer printing because most printed documents contain some black content, with many comprising exclusively black printed content — for example, word processing documents or spreadsheet tables.

How do I setup a receipt for my printer?

Printer Hardware Setup

Plug the ethernet cable into the leftmost port labeled ‘100/10BASE’.
Plug the power cable into the rightmost port.
Connect the opposite end of the ethernet cable to an open numbered port on the router.
Push back the lever to open the cover, load the paper, and close the cover on the paper.

How do I update my star printer?

Updating Star Printer Firmware

Double click the MOT2FMEMNIC file that matches your OS (Windows or Mac).
Click “Discovery” button, then you can find Star LAN printers in the Network.
Check “Select” check box of printers which you would like to reflash.
Press “File” button and select Firmware data (mot file) in PC.