When handling electrical equipment What should you do first?

When handling electrical equipment What should you do first?

When handling any electrical equipment, be sure to a. Wash your hands immediately before handling it.

What should be checked for the assurance of safety when using electrical equipment?

How Do I Know If My Electrical Equipment is Safe?

  1. Make sure the appliance is switched off and the plug removed from the power socket before you start.
  2. Check the plug to make sure it is correctly wired.
  3. Check the instruction book to see if there are any troubleshooting guides to help you.

What are 3 rules for preventing fires?

Ways to prevent fire incidents:

  • Avoid unattended or careless use of candles. No open flames are allowed inside any Tufts University building.
  • Keep BBQ grills at least 10 feet from the house.
  • Do not disable smoke or CO detectors.
  • Do not smoke indoors.
  • Do not leave your cooking unattended.

Which promotes the safe use of electrical equipment in the workplace?

When it comes to electrical safety, OSHA refers to NFPA 70E, which requires employers to conduct an electrical hazard assessment consisting of a shock hazard analysis and an arc flash hazard analysis before work is performed on live equipment operating at 50 volts and higher.

What are the two main electrical hazards a qualified electrical worker looks out for?

OSHA defines qualified workers as those specially trained to work on live electrical equipment. Qualified workers must protect themselves against all electrical hazards including shock, arc flash, burns and explosions. Training is key.

What is electrical safety in the workplace?

Never leave electrical tools or equipment unattended; turn them off when not in use. Don’t overload sockets, outlets, or cords. Replace damaged cords and cables immediately. Ensure your workspace is dry and clean.

What are the 3 hazards of electricity?

There are three main types of electrical hazards: electric shock, electrical burns, and arc blasts (the effect of blasts).

What two types of grounds are required by OSHA?

There are two kinds of grounds, both are required by the OSHA construction standard. System or Service Ground: In this type of ground, a wire called “the neutral conductor” is grounded at the transformer, and again at the service entrance to the building.

What are the three elements of a basic program for electrical safety?

3 Basic Elements of Electrical Safety Training

  • Awareness of hazards and adequate training. In some companies with high employee turnover, many new hires do not receive the safety training they should, which is particularly dangerous when they have to work with electrical hazards.
  • PPE compliance.
  • Human factors.

What are some electrical safety practices?

Nonconductive hard-hats, gloves, and foot protection or insulating mats. Eye and face protection whenever there is danger from electric arcs or flashes. Insulated tools or handling equipment. Protective shields and barriers to protect against electrical shock and burns.

Which one of the following circuit interrupts is most effective?

Which one of the following circuit interrupts is most effective at preventing major shocks? GFCI is the right answer because others cannot shut down electricity immediately.

What are the basic electrical safety principles?

then at least do this!

  • Principle 1: Work only on dead equipment whenever possible. Working on live electrical equipment can be extremely hazardous.
  • Principle 2: Lock it out to prevent reenergization.
  • Principle 3: Test it before you touch.
  • Principle 4: Ensure you have the proper qualifications.
  • What’s missing?

What is the most common electrical injury?

Electrical burns are the most common shock-related, nonfatal injury. They occur when a worker contacts energized electrical wiring or equipment. Although electrical burns can occur anywhere on the body, they most often occur on the hands and feet.

Why is basic electrical safety important?

Electrical Safety is Unique Finally, electrical hazards are not something that the average person has much experience with, which is why it is critical that they are given at least basic electrical safety training so they know how to avoid accidents or injuries.

What are some safety tips?

Here are some ways you can work to stay safe on the job.

  • Be Aware.
  • Maintain Correct Posture.
  • Take Breaks Regularly.
  • Use Equipment Properly.
  • Locate Emergency Exits.
  • Report Safety Concerns.
  • Practice Effective Housekeeping.
  • Make Use of Mechanical Aids.

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top