How is woven shirt consumption calculated?

How is woven shirt consumption calculated?

For the determination of fabric consumption of any parts of a woven shirt, you have to take the reading length and a maximum width of this part of the shirt….Shortcut Method of Fabric Consumption Formula for Woven Shirt

1. Body length = Body length + Seam allowance.
2. Body width = Chest width + Seam allowance.

How do I calculate how much fabric I need for a shirt?

That’s why fabric consumption must be calculated accurately to maximize the profit from an order. Suppose, knitted basic T-shirt has been following information….How to do Basic T-Shirt fabric consumption.

Measurement	Centimeter
Body Length (BL)	= 46.5 cm + 4 cm = 50.5 cm
Sleeve Length (SL)	= 14 cm + 4 cm = 18 cm
½ Chest	= 34 cm + 4cm = 38 cm

How do you calculate average woven fabric?

Formula = Length X Width / Fab width X Fab Unit

1. Here,
2. Length = length of the specific parts + allowance.
3. Width = width of the specific parts + allowance.
4. Fab width = Fabric width ( after considering the shrinkage.
5. Say, fabric width is 45″ & the shrinkage.
6. be (45″-1″) = 44″ in the formula.

How do you calculate fabric consumption?

1. Fabric Consumption by Single Formula Method: (Body length + Sleeve L. + Allowance) × (Half Chest + Allowance) × 2 × 12 × 160.
2. Fabric Consumption by Individual formula Method: Body part consumption; (Body length + Allowance) × (Half Chest + Allowance) × 2 × 12 × 160 × 1.10.
3. Fabric Consumption by marker planning formula:

How many methods are used for fabric consumption?

There are two methods to development of marker for fabric consumption.

How do you calculate yarn consumption of fabric?

The process of yarn consumption calculation of a particular woven fabric is explained with the help of an example. Problem: Calculate the yarn consumption per yard of a woven fabric of specification (20 X 16)/(128 X 60) X 58”, 100% cotton 3/1 twill fabric.

How is GSM calculated?

– Multiply the average weight of swatches by 100 to calculate GSM of the sample fabric. (Normally, the area of round GSM cutter is 1/100 square meters.)

How do you calculate yarn consumption in weaving?

1. Indirect system. Total No. of hanks per one pound is the count of that yarn (Ne) i.e. if 10 hanks (10 x 840 yds. or 7680 meters) weighs one Pound or 0.454 Kg, then the Count of Yarn in indirect system 10s or 10Ne.
2. Direct System. Count = Weight in grams per 9000 meters of yarn.
3. Universal System.

How do you calculate sweater consumption?

The next task for a sweater merchandiser is to multiply sample weight with 12pcs to know the weight of per dozen sweaters. Finally adding wastage percentage with that, can make the sweater consumption. Normally the wastage percentage range is 10-20%.

What is yarn consumption?

Yarn consumption is measured from woven stuff specification. Yarn consumption way warp weight calculation together with weft weight calculation of woven fabric. There are unlike yarn consumption formula for woven fabric.

What is relation between Heald count and Reed count?

A 72s stockport reed means 72 dents on 2 inches or 36 dents per inch. – there will be blue paper on baulk of the reed. When a set contains 4 shafts, it is called a plain set. The number of heald eyes per inch across the healds in a set expresses the count of the heald.

What is ends per inch of fabric?

The number of warp ends in one inch of woven fabric; on a loom, the number of warp ends in one inch of reed. Sometimes referred to as “sley.” Usually expressed as in loom, in greige, or finished to convey the condition of the cloth.

What is Reed Space in weaving?

A reed is part of a weaving loom, and resembles a comb. It is used to separate and space the warp threads, to guide the shuttle’s motion across the loom, and to push the weft threads into place. The reed is securely held by the beater, and consists of a frame with many vertical slits.

How long soak flat reed?

5 to 10 minutes

How much Reed does it take to make a basket?

Using 24 pieces of flat-oval reed cut at 38 inches in length, now continue weaving in and out and building your basket. If you have a handle that tapers at the sides, you will have to keep the weaving very tight as you use less and less of the cane lengths as you build your basket.

How much Reed do I need for a basket?

If you want your basket to have a single handle, cut a 33″ piece of No. 10 reed (or two 33″ lengths of No. 5) and soak it for ten minutes. In order to be able to insert the handle easily into the basket, each end must be tapered.

How do you cut a reed for a basket?

Starting at the end of the reed measure from end point to the length you need and snip off length with the scissors. Measuring out the length for a stake. Continue to follow this process until you have the number of stakes you need of that length. Proceed with cutting any other stake lengths.

Can you cut a basket in half?

Cutting the basket in half is surprisingly easy. A sturdy pair of kitchen shears will do the job! If you’re having trouble with a thicker basket, you can use a jigsaw or dremel to cut the basket in half. Cut as close to the handle as possible without jeopardizing the strength of the handle.