What causes a line on my copies?

What causes a line on my copies?

A very common, extremely frustrating issue when it comes to copiers is the ongoing occurrence of getting lines on your copies or scans! The slit glass area on your copier can get dirty for multiple reasons. In my experience as a service tech, the most common culprits are: Wet ink, especially from gel pens.

How do I fax a hard copy?

How to send a fax – using the document feeder. Once the fax feature has been added to the printer, select the “fax” feature and operate the printer as you would a regular fax machine. Put the document in the feeder, dial the number you want to fax, and then press the send button.

Why does my brother scanner say memory full?

The ‘Out of Memory’ message means your Brother machines memory is full. The amount of memory used depends on the amount or type of data on the documents being faxed, copied or printed from the PC. If the document being scanned has more than 5% coverage, it will use more memory.

How do you clear the memory on a Brother fax machine?

Delete the faxes stored in my Brother machine’s memory.

1. Press MENU or MENU/SET and choose Fax => Remote Fax Opt => Fwd/Page/Store or Forward/Store.
2. Press the UP OR DOWN ARROW key to choose Off.
3. Press the OK or MENU/SET key.
4. Press 1.
5. Press the STOP/EXIT key.

How do I reset my Brother printer?

Press Menu from the printer control panel. Using the Up or Down Arrow keys, select Initial Setup and then press OK. Using the Up or Down Arrow keys, select Reset and then press OK. Using the Up or Down Arrow keys, select the reset function of your preference and then press OK.

How do I troubleshoot my Brother printer?

Brother Printer Troubleshooting Tips To Follow

1. Check the power supply.
2. Try turning your printer off and restart it if you face any issue in between sometime.
3. Check network/ USB cables or USB ports out timely.
4. Uninstall-Re-Install New Brother drivers.
5. Resetting and Deleting of Print Jobs.

Why is my Brother printer in error state?

You can update or re-install the printer driver. According to many Brother Printer users, the Error State is often caused by the corrupting of the printer drivers. The technicians also suggest the same.

How do I get a printer out of error state?

Sometimes, simply restarting both your computer and printer can be the solution to the “printer in error state” issue. Power off your printer and computer completely, leaving them in this state for a few minutes, then turn them on again to see if the problem is gone.

How do I get my Brother printer back online?

Open Printers and Devices windows from Control Panel. Again Right-click on the selected printer and click on “Set as default printer”. Under “Set as default printer” you can see your Printer status – offline or paused. If the Brother printer is paused, simply click on “Resume printing”.

Why is there an error with my printer?

If your printer’s status displays “Printer in error state,” there may be a problem with the printer itself. Make sure the printer is turned on and connected to your PC by Wi-Fi or cable. Check it for low paper or ink, and be sure the cover isn’t open and the paper isn’t jammed.

How do I fix printer status error?

How do I get my printer out of an error state?

1. Make ports settings changes. Press the Windows logo key + R on your keyboard > type devmgmt.msc and hit Enter to open the Device Manager.
2. Make sure that your printer is Online.
3. Reinstall the printer driver.
4. Set the Print Spooler service to automatic.
5. Update Windows.

How do I fix printer error?

First, try resetting the printer. Turn the printer off, and then unplug it. Plug the printer back in, and turn it back on again. Resetting the printer is a simple resolution, but it might still be enough to resolve the issue for some users.

How do you fix a printer problem?

Try following these steps to get your printer back online.

1. Check to make sure the printer is turned on and connected to the same Wi-Fi network as your device.
2. Run a printer power cycle.
3. Set your printer as the default printer.
4. Clear the print queue.
5. Reset the service that manages the printing queue.

What is the problem if the printer doesn’t print?

Sometimes, though, printers are finicky—there may be paper loaded, but if the printer can’t grab hold, it’s going to think it’s empty. Try removing the paper tray, re-aligning the paper, and sliding it back in. In other instances, there may be some paper jammed in the mechanism.

What is the common problems of a printer?

10 Common Printer Problems You Can Fix Yourself

• Printer is unresponsive.
• Printer won’t print.
• Bad print quality.
• Uncertain about printer security.
• My printer won’t scan.
• Too many paper jams.
• Prints too slowly.
• Printing is too expensive.