What do you do in case of a fire in a lab?

What do you do in case of a fire in a lab?

• Notify: Other occupants of the immediate space (yell) Other occupants of the facility (use the fire alarm)
• Evacuate. The immediate area of the problem. The space within which the problem has occurred.
• Isolate. Lower hood sash, close lab door(s), close corridor doors. IF SAFE TO DO SO, attempt to extinguish.

How can we prevent computer lab fires?

Inspect power cords—frayed or damaged power cords increase the risk of fire, as a spark could easily ignite the room. Check for damage and have repairs done immediately. Maintain and clean computer systems—allowing dust and debris to settle on your equipment only adds to flammable materials. Think of dust as kindling.

What do you do in case of fire outbreak?

What To Do If A Fire Starts

• Know how to safely operate a fire extinguisher.
• Remember to GET OUT, STAY OUT and CALL 9-1-1 or your local emergency phone number.
• Yell “Fire!” several times and go outside right away.
• If closed doors or handles are warm or smoke blocks your primary escape route, use your second way out.

Do and don’ts in fire?

Give it fresh batteries and your smoke alarm will stay awake and watch for fire while you are sleeping. In case of fire: DON’T HIDE, GO OUTSIDE! Fires are scary, but you should NEVER hide in closets or under beds when there is a fire. To escape during a fire; Fall & Crawl.

What are the 5 main types of fire extinguishers?

When it comes to the types of fire extinguishers, there are five main types including wet chemical, CO2, dry powder, foam and water. In order to meet the current regulations, it is important for you to have the exact type of fire extinguisher that is needed for your premises.

What is the best agent to extinguish a Class C fire?

Carbon Dioxide – Carbon Dioxide fire extinguishers extinguish fire by taking away the oxygen element of the fire triangle and also be removing the heat with a very cold discharge. Carbon dioxide can be used on Class B & C fires.

What is Type C fire extinguisher used for?

A Class C fire extinguisher is used on fires that involve live electrical equipment, which require the use of electrically nonconductive extinguishing agents. (Once the electrical equipment is de-energized, extinguishers for Class A or B fires may be used.)