How do you install a rear axle bearing?

How do you install a rear axle bearing?

1. Remove the Rear Backing Plate.
2. Locate and Remove Pivot Pin Bolt.
3. Remove the Pinion Pin.
4. Remove the C Clip and Axle.
5. Remove the Axle Seal.
6. Remove and Install Axle Bearing.
7. Install the Axle Seal.
8. Reinstall the Axle.

How do you remove a rear axle bearing without a puller?

Steps to take if you want to know how to remove bearing from the shaft without a puller

1. Select the right surface.
2. Apply the vehicle’s parking brake.
3. Use a car jack to raise your vehicle.
4. Place jack stands under your vehicle.
5. Remove the coverings and trays that are in the way.
6. Remove the tires.

What vehicles came with a Ford 9 inch?

Common applications

• 1957-1986 Ford F-100 & F-150.
• 1958-1960 Edsel (All series including Wagons)
• 1976-1980 Ford Granada.
• 1976-1979 Lincoln Versallies.
• 1957-1970 Ford Fairlane.
• 1957-1971 Ford Thunderbird.
• 1964 1/2-1973 Ford Mustang.
• 1966-1983 Ford Bronco.

Are all Ford 9 inch rear ends the same?

about Ford 9 Inch Differentials! The most popular rear end around is no doubt the Ford 9 inch unit, it is used by restorers, street rodders and racers alike, regardless of what brand of car the axle is going in. Generally most cars received the small axle bearings and 28 spline axle shafts.

Are all Ford 9 third members the same?

All 9 inch Ford chunks will fit all 9 inch Ford housings. There are many different yokes that have been used on the 9 inch over the years.

How much does a Ford 9 third member weight?

ea. 4. 3rd Member: Conventional Diff. – 68 lbs.

What is the bolt pattern on a Ford 9 inch?

5 x 4.5

What is a Daytona pinion support?

N1914: Ford Daytona pinion supports are an option to replace the stock OEM unit. The stock support is made of nodular iron and uses the same size bearing front and rear. The N1914 is also constructed from cast iron, but uses a larger rear pinion bearing for increased load capacity.

How much is a 9 inch Ford rear end worth?

standard 9 inch pumpkin core 50-100 bucks. typically i get 350-450 for a complete core 9 inch for a 67-70 mustang/cougar. closer to the 350 range for a fairlane unit as you don’t sell as many. so if your buddy wants to sell it for 50 or 75 bucks then buy it.

How can I tell what rear end my Ford has?

How to Identify Ford Rear Ends

1. Locate the axle ID tag on the rear-end housing—usually a sheet-metal tag bolted to the housing, although some vehicles had a paper tag, which may be missing.
2. Decode the service number by matching it to an axle service code chart, similar to those found on WoodyG.com and Drivetrain.

How do I know what rear axle I have?

It’s worth noting that rear axles can sometimes be positively identified by a casting number and date stamped on the differential cover or axle tube. However, road debris, dirt, grime, and general age can obscure these numbers.