What is A4LD transmission?
The A4LD was the first Ford transmission to use an EEC-controlled torque converter lock-up clutch and later became the first to use electronic shift control (via a 3-4 shift solenoid). These four and five-speed transmissions are used in four cylinder and V-6 applications (primarily the Ranger and Explorer).
What vehicles have a A4LD transmission?
Vehicle Compatibility – Makes & Models
- 1985–1990 Ford Bronco II.
- 1987–1993 Ford Mustang (when equipped with the 2.3 I4)
- 1987–1988 Ford Thunderbird (when equipped with the 2.3 I4)
- 1985–1994 Ford Ranger.
- 1986–1994 Ford Aerostar.
- 1991–1994 Ford Explorer.
- 1991–1994 Mazda Navajo.
How much fluid does a A4LD transmission hold?
For Automatic Transmission: A4LD….MA5
| Notes: | This specification has been updated from Mercon to Mercon V per TSB 06-14-4 |
|---|---|
| Capacity: | 4 speed 4WD A4LD Total Fill 10 quarts 3 quarts Initial Fill 4 speed RWD A4LD Total Fill 9 quarts |
How do I know if I have a C5 transmission?
The length of the transmission is defined as the distance between the front of the bell housing and the seam that separates the bell housing from the body of the transmission. If the length measures 7 inches, the transmission is a C5. If the length instead measures 6 1/4 inches, it is a C4.
Does Ford make a C5 transmission?
The Ford C4 is a three-speed, medium-duty automatic transmission introduced on 1964 model year vehicles and produced through 1981….Ford C4 transmission.
| C4/C5 | |
|---|---|
| Overview | |
| Manufacturer | Ford Motor Company |
| Production | 1964–1986 |
| Body and chassis | |
What is the difference between C4 and C5?
C4 and C5 instances run on different hardware systems. C4 runs on Haswell chips, while C5 runs on Skylake with the Nitro system. In some situations, such as governmental clouds, all resources have to be vetted and approved. So it’s possible that the C4 might be approved while the C5 isn’t.
How do I know what Ford transmission I have?
The prime identification source is the pan located on the bottom of the transmission; its shape and bolt count is indicative of which model transmission is present.
- Inspect the pan found on the bottom of the transmission.
- Count the number of bolts on the transmission pan.
What is the difference between a C4 and a C6 Ford transmission?
Ford C4 is a medium-duty transmission judging from its lightweight of 130 lbs dry w/ torque converter and its design with an aluminum case. On the other hand, C6 transmission is a heavy-duty transmission that can handle much load.
How much HP can a C6 transmission handle?
Yes a c6 will hold 500 hp but not a stock one with 3 high gear clutches or a stock valvebody…. A good upgrade is to remove the wave washer from the forward clutch and fit 5 plates,upgrade the high gear clutch to at least 4 but 5 is better and go with a transgo valvebody kit…
Does a C6 transmission have overdrive?
Adding overdrive to a C6 is physically impossible, but the 4R100 can donate its forward planetary gear set for shorter first and second gear ratios. This creates a “wide-ratio” C6.
Will a 351 Windsor fit a C6 transmission?
— No, that 351W will not bolt onto your 351M C6. — No, all 351W engines used the 351W bellhousing pattern, shared by the 302, 289, and 300-I6. — Your C6 uses a pattern shared by the 351C, 351M/400M (same engine block), and 429/460.
Is a C6 transmission good?
The C6 is the strongest, most durable light duty automatic Ford has made. It was designed in the 60’s during the horsepower wars. The E4OD / 4R100 is not necessarily a “crap” transmission, it is based on the C6.
Will a C6 transmission fit a 460?
The 351m, 400, 429, 460 all bolt up to the C6 transmission without any adapters. But if you want a 429 or a 460 you need a kit for it to be able to fit into the engine bay without problems such as control arms, steering, exhaust, motor mounts, etc.
Will a 390 Bellhousing fit a 460?
No, C6 transmissions are engine family specific as the bellhousing & trans are a one piece casting ie, small block C6 will only fit Cleveland or Windsor, FE (390 etc) will only fit FE, & 385 series (429, 460 etc) will only fit these engines (but will also suit 351M & 400M).
How strong is a C6 transmission?
As mentioned, the C6 transmission is quite strong and was paired with many of the larger V8 engines from Ford. This 3 speed automatic transmission was designed to handle up to 475 lb-ft of torque, although the C6 with the aftermarket upgrades used for drag racing can handle significantly more torque.
What engines fit a C6 transmission?
The C6 was an automatic transmission used on engines such as the 351 Cleveland and the Ford 385 engines. Some well-known applications of the C6 transmission are the Ford Torino, Thunderbird and Mustang (This transmission has no relation the C6 Corvette).
How heavy is a C6 transmission?
140 lbs
Will a C6 transmission fit a 300?
300/C6 will be fine.