What oil does a 2009 Ford Fusion take?
The 2009 Ford Fusion came standard with a 2.3L 4Cylinder engine but the higher end trim levels came with a 3.0L V6 engine. If You have the 2.3L model You will have a capacity of 4.5 US quarts when the filter is included. You will need to run this motor on 5W-20 synthetic oil.
What kind of oil does a Ford Fusion take?
Engine Oil
| Viscosity: | 5W-20 (Above -29) To improve cold start in extreme climates where the ambient temperature is -22 F (-30 C) or below use 0W-20 oil meeting WSS-M2C947-B1. |
|---|---|
| Capacity: | 5.7 quarts (with filter)After refill check oil level. |
| Torque: | 21 ft/lbs (Oil Drain Plug) |
Does Ford Fusion require synthetic oil?
Ford officially recommends that the Ford Fusion use full synthetic oil 5W-20 in normal climates, and OW-20 in extremely cold climates.
Can I use 5w30 instead of 5w20 in my Ford Fusion?
Ford specifies only one viscosity rating for this vehicle, namely SAE 5W-20. But, the statement from Ford also implies that use of oil other than 5W-20, such as 5W-30, will reduce the service life (“durability”) of the engine. Consequently, I would stick with the 5W-20. Synthetic oil is much preferred, of course.
Does my car really need synthetic oil?
Yes. Some engines require the use of synthetic oil, but most do not. However, synthetic motor oil can be used in place of conventional oil even if the vehicle manufacturer does not require it.
Can you put regular oil in your car after synthetic?
Can You Use Regular Oil after Synthetic Oil? Both synthetic and regular oil has the same application, and thus you can use regular oil after synthetic oil. Synthetic is much better compared to regular oil in terms of quality. Therefore, you will note a change in the steady performance of the engine.
Is it OK to use synthetic blend oil in older cars?
It protects better, performs better, and lasts longer, and it’s no longer made with a chemical compound that could hurt older vehicles.