Will a 351 Cleveland bolt to a C6 transmission?

Sorry the 351 C uses a small block bolt pattern on the trans the 351 M uses a big block bolt pattern and will swap with no problem. You can use your internal components from your current C6 in a big block C6.

What transmissions bolt up to a 351 Cleveland?

The 351W and 351C use the small block bellhousing bolt pattern. The 351M and 400 use the big block bolt pattern. The C4 auto trans, which has a separate bell, can be used, but you’ll probably have to go with an aftermarket bell for the big block pattern. The C4 has two different designs.

Is a 351 modified a big block?

Is the Ford 351 a Small Block or a Big Block? The 351 Windsor is a small block. If memory serves it has a taller deck height than the 302 but is otherwise very similar.

How do you tell the difference between a 351 modified and a 351 Cleveland?

There are several external differences that can help to distinguish between the 351W engine and the 351C and M engines: The 351W has three bolts attaching the valve covers on the exhaust manifold side; the 351C,M has four. The 351W has the timing cover bolted to the block.

How do I know if my 351 is modified?

How can you tell the difference between the 351 engines by looking at them?

Radiator Hose. On a Cleveland/Modified engine, the radiator hose (and thermostat housing) sticks vertically right out of the top of the engine block.
Valve Covers.
Timing Chain.

How much can you bore a 351 Cleveland?

The most you’re going to be able to get into a 351C is 408 ci with a 4.040-inch bore. Again, a 4.060- inch bore is discouraged unless you are very confident of a sonic check.

How much does it cost to rebuild a 351c?

It cost around $2500. for a complete rebuild including heads.

When was the 351 Cleveland made?

1969

How much does a 351c engine weight?

It’s around 550 lbs.

How heavy is a Ford 400 engine?

ENGINE	FAMILY	WEIGHT (LBS)
351M/400	335 (Modified)	575
332-428 (ex.SOHC)	FE	625
427 SOHC	FE	680
429/460 (ex. Boss)	385	720

How much does a bare 351w weigh?

A totally bare block, with maincaps and bolts average between 165-180lbs.