Where is the transmission drain plug on a Harley?

Where is the transmission drain plug on a Harley?

The drain plus is located between the shock absorbers, underneath the transmission. Use the ratchet, 3-inch extension and 5/8-inch socket to remove it. Once it’s loose, finish removing the drain plug by hand to prevent it from falling into the drain pan.

Where is the oil drain plug on a 99 Road King?

The drain plug is on the front (facing the forks) left side (clutch) of the oil pan. On the 1999 model the drain plug is a 3/4 inch bolt. After changing the oil, be sure to replace the O-ring.

What kind of fluid goes in a Harley primary?

You actually have a couple of choices for the primary drive. The optimum product would be Mobil 1 Racing™ 4T 10W-40 motorcycle oil, but it is also okay to use Mobil 1™ V-Twin 20W-50.

How often should I change the transmission oil in my Harley?

Oil changes as per Owners manual every 5k Miles, Tranny and Primary every 10K. If you ride it more you’ll be changing it more often.

How often should you change the primary fluid in a Harley Davidson?

You need to carry out Harley Davidson primary oil change every 5,000 miles if you want your bike to last long and perform efficiently.

Should I run synthetic oil in my Harley?

Ans: For all weather conditions, Harley Davidson recommends SAE 20W50 synthetic oils the Twin Cam engine. But if you live in a region where it gets below 40F, you should get something that maintains SAE 10W40 standards. Similarly, SAE 60 H-D is suggested for higher temperatures above 80 degrees.

What is the best oil for Harley transmission?

For the record, AMSOIL recommends AMSOIL 20W-50 Synthetic V-Twin Motorcycle Oil in the engine, transmission and primary chaincase on most Harleys (consult our Motorcycle Product Guide for specific recommendations).

Can you use gear oil in Harley primary?

Our answer: It is perfectly acceptable to use 75W-140 gear oil in Harley-Davidson transmissions. But, do consider that 75W-140 is much thicker than oils typically used in Harley transmissions. For instance, AMSOIL V-Twin Synthetic Transmission Oil is an SAE 110 gear oil.

How much oil goes in a Harley transmission?

When filling the transmission, use Harley-Davidson TRANSMISSION LUBRICANT (Part No. 99892-84 (qt.) or 99891-84 (gal.)). The transmission fluid capacity is approximately 24 ounces (0.71 liters).

How much oil goes in a Harley primary?

Fill the primary with oil Harley Davidson Softails require one quart of primary fluid. Be sure to check your owner’s manual or the AMSOIL Product Guide for the correct primary oil capacity for your bike.

What is a 3 hole oil change?

What is a 3-Hole Oil Change? A 3-hole oil change is when you replace the oil in all 3 essential components of the powertrain: Engine. Transmission.

Is Harley SYN3 full synthetic?

Syn3, along with most of your automotive “full” synthetic oils, are not true synthetics. They are cracked hydrocarbon oils. They are regular crude base stock, just more refined, and with some synthetics added in.

How much does a Harley Davidson oil change cost?

Service Pricing Menu

INSPECTION	PRICE*
Multi Point Inspection [FREE with any service]
OIL & FILTER CHANGE	PRICE*
Street [black filter only]	$99.95
Sportster	$99.95