How much does it cost to replace a timing chain on a Nissan Navara?

How much does it cost to replace a timing chain on a Nissan Navara?

There is no charge to do this, but the only way to be 100% sure is to remove the covers and physically inspect the chain condition. This takes around 4 hrs and cost $460. You only pay that if the chains checkout ok and we don’t go ahead with any repairs.

At what mileage should I change my timing chain?

The timing chain normally needs to be replaced between 80,000 and 120,000 miles unless there is a specific problem. Issues with the chain are common in higher mileage vehicles.

How do I test my YD25 timing chain?

To confirm that fuel pump timing chain wear is the problem, ensure the engine temp is below 65 deg, disconnect the camshaft sensor plug located on the cylinder head, left hand side rear, and restart the engine. If the engine does not shut down after 5 seconds then the fuel pump drive timing chain needs replacing.

Is Nissan Navara timing chain or belt?

Answered by CarsGuide The simple answer, Andrew, is that the 2.5-litre turbo-diesel engine in your Navara has a timing chain rather than a timing belt. However, it’s not that simple, as the engine uses two chains, rather than a longer, single timing chain.

Are Nissan Navara D40 reliable?

The D40 Navara is generally robust and reliable, but reports from carsGuide readers suggest the clutch is an issue. Some owners are reporting they are replacing clutches at odometers as low as 25,000km, and some have had to replace two or more clutches inside 100,000km.

Does the Nissan 4.0 V6 have a timing belt?

From 2005 to 2021 all Nissan Frontier models have timing chains and interference engines. From 1998 to 2004 all 4 Cylinder Nissan Frontier models have timing chains and interference engines while the V6 models have timing belts and interference engines.

Does my Nissan Frontier have a timing belt or chain?

The Nissan Frontier has a timing chain instead of a timing belt.