Is there a fuse for airbag light?

Is there a fuse for airbag light?

One fuse in particular, fuse #13 is a likely culprit. If your airbag light is on and your rear windshield wiper doesn’t work, then it’s a pretty good indication that you need to change fuse #13 and possibly others. Blown fuses can definitely cause the airbag light to come on.

How do you turn off the airbag light on a Ford F-150?

Turn the ignition switch off, wait 10 seconds and then turn it back on. The airbag light should illuminate for six seconds and then turn off. If the light doesn’t come on, if it lights continuously, or if it flashes, there is still a malfunction present in the SRS.

How do you check airbag codes?

The airbag codes are double digit numbers. To read the codes, count the number of times the light flashes, wait for the pause and count the flashes again. For example, two flashes, a pause and four flashes mean that your airbag system’s problem is a code 24.

How do you test an airbag sensor?

The way you know if the sensor is at fault or not, before scanning your airbag system for faults, is to simply look at the “Passenger Airbag Off” light. If there’s no one in the seat, the light should illuminate. If there is someone in the seat, the light should turn off, signifying that the system is armed.

How do I turn on passenger airbag GLA?

The firSTStep You will need to take is to go to the driver or passenger side of Your vehicle, it doesn’t matter which, and sitting down inside. Now, take a look at the center dashboard, just above the radio. There, You should find the on and off switch for the passenger side airbag.

What does front left malfunction mean?

The dash warning light “Front Left Malfunction Service Requested” warning light continues to come on. That light indicates a problem with the restraint system with the drivers seat. I’ve had the van back to my local MB dealer 3-4 times for this issue.

What’s SRS light mean on Mercedes?

Supplemental Restraint System

Begin typing your search term above and press enter to search. Press ESC to cancel.

Back To Top