How much oil does a 2001 Ford Explorer Sport Trac take?
Capacity: 5 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
How much oil does a Ford Explorer Sport Trac need?
Engine Oil 5 quarts. (with filter)After refill check oil level.
What oil goes in a 2002 Ford Explorer Sport Trac?
Mobil 1 Extended Performance Synthetic Motor Oil 5W-30 5 Quart.
What kind of oil do I use for a 2002 Ford Explorer?
The two base engines the 4.0L V6 (non-flex fuel compatible) and the 4.0L V6 (flex fuel compatible) require 5 quarts of 5W30 synthetic oil while the 4.6L V8 optional engine takes 6 quarts of 5W20 synthetic oil.
How many quarts of oil does a 2004 Ford Explorer V8 take?
2004 Ford Explorer – Specs
| Exterior Dimensions | 2004 Ford Explorer | |
|---|---|---|
| Oil capacity | V6 | 5.0 qt |
| V8 | 6.0 qt | |
| Coolant capacity | V6 | 16.3 qt |
| V8 | 18.6 qt | |
How do I put oil in my Ford Explorer?
To change the oil on a ford explorer you will need to locate the drain plug, remove that, allow the oil to drain, remove the oil filter, and replace that. When the oil has been drained replace the drain plug with a new washer, and then fill oil from the top of the engine until full.
What kind of oil does a 4.0 Jeep take?
Engine Oil
| Viscosity: | 10W-30 (Above -18) 5W-30 (Below 16) |
|---|---|
| Capacity: | 6 quarts (with filter)After refill check oil level. |
| Torque: | 25 ft/lbs (Oil Drain Plug) |
What kind of oil does a 4.0 Ford take?
This engine is recommended to use the SAE 5W-30 synthetic blend motor oil. Ensure that You always use the right oil for Your car, if You want optimal performance. Not only the performance benefits from this, as Your car will also last longer overall. An oil change should be done at least every 4,000 to 5,000 miles.
Is 10w30 thicker than 5w30?
Is 10w30 thicker than 5w30? 10w30 is thicker than 5w30 because it has a higher viscosity in low temperatures. The engine oil will flow slower than 5w30 during the cold season. Thicker or higher viscosity metal oil has a better seal compared to low viscosity oil.