What does a FRAM ph3387a oil filter fit?
Fits the following vehicles: 84-80 American Motors, 09-75 Buick, 07-02 Buick Truck, 98-97 Cadillac, 88-85 Cadillac, 82-80 Cadillac, 80 Checker, 08-76 Chevrolet, 14-78 Chevrolet/GMC Truck, 02-99 Daewoo, 79-78 GMC (Gasoline), 14-00 GMC Truck, 03-96 Isuzu Truck, 94-89 Isuzu Truck, 86-80 Jeep Truck, 04-75 Oldsmobile, 04-92 …
What does a FRAM PH3980 oil filter fit?
4.3L
What engine does a Fram PH30 oil filter fit?
We have 23 to ship TODAY. Fram PH30 oil filter is a spin on style and fits most of the popular marine engines such as Aero Marine, Chris Craft, Chrysler, Crusader, Daytona, Indmar, Mercruiser, OMC, Pleasurecraft and Volvo.
What oil does a 4.3 MerCruiser take?
Mercury Marine, the manufacturer of the 4.3L MerCruiser engine, specifies that the owner use Mercury MerCruiser Full-Synthetic Engine Oil, 20W-40, with a NMMC EC-W rating. This specific oil is recommended by the company for all MerCruiser engines, including the 4.3L.
Which is better 10w30 or 20W40?
20w 40 is a thicker oil when compared to the original 10w 30 oil. So 10w 30 oil is going to flow better than 20w40 oil when you initially start it and also run it. If the oil flows better the better the oil will lubricate and protect engine parts.
What is 20W 40 in engine oil?
A thin oil has a lower number and flows more easily, while thick oils have a higher number and are more resistant to flow….English translation: viscosity grade.
| English term or phrase: | what does 20W40 stand for |
|---|---|
| Selected answer: | viscosity grade |
| Entered by: | Kim Metzger |
How often do you change boat oil?
every 50-100 hours
How do I tell what year my MerCruiser engine is?
Every Mercury outboard has a serial number label located on the transom bracket area of the engine. The latest serial number labels display a 2-digit number in a box at the lower right portion of the label. These digits coincide with the last two digits of the year in which the outboard was manufactured.
When should you check oil level in a boat?
For accurate readings, check oil only when engine is cold or after engine has not run for at least an hour. Before starting (cold engine) tilt outboard out/up past vertical to allow trapped oil to drain back to oil sump. Allow outboard to remain tilted for approximately one minute.
When should you check boat oil?
A good time to do it is when changing the boat’s oil in the fall. Oil samples are best taken at regular intervals each year. These, for example, can either be drawn every 50 hours or, if the boat is only used lightly, just before winter layup, which is what I do.
How often should you check the engine oil level?
Your oil is often a good indicator of your engine’s health and you should check it at least once every couple of weeks or before a long journey and in older cars, maybe even more.
How long should oil last in your car?
It used to be normal to change the oil every 3,000 miles, but with modern lubricants most engines today have recommended oil change intervals of 5,000 to 7,500 miles. Moreover, if your car’s engine requires full-synthetic motor oil, it might go as far as 15,000 miles between services!