What is the code for my car radio?

What is the code for my car radio?

The best place to locate a radio code is in the owner’s manual of your car. In most cases, the owner’s manual will be located in your glove box and will include general automotive service and maintenance tips, along with instructions on how to operate each system on the vehicle.

How do I reset my anti theft radio?

Press the “Hour” button (or right arrow button) to set the first and second digits of the code. Release the button once the four-digit code is accurately displayed. Press the “Mode” button to lock in the code you set. Turn the stereo deck on by pressing the “Source” or “Power” button to complete the reset.

How do I unlock my RDS radio?

To unlock radio you will need access to a GM scan tool. The radio must be in LOC mode NOT in INOP mode. Turn the ignition ON (The radio displays LOC). Press and hold presets buttons 2 & 3 or 1 & 4 for approximately 10 seconds.

How do I unlock my Camaro radio?

Part 1 of 4: Determine if your radio can be unlocked at home

1. Step 1: Look at your radio.
2. Step 2: Check for the identification code.
3. Step 1: Turn on the ignition.
4. Step 2: Turn on the radio.
5. Step 3: Write down the code.
6. Step 4: Note down the code.
7. Step 1: Contact the GM radio hotline.
8. Step 2: Enter the code.

How do I unlock my 2013 GM radio?

To unlock the radio in the 2013 Chevy Silverado You will start by turning on the vehicle. You will see the display indication “LOC” which is telling You the theftlock system is activated. Now press and hold the reset buttons 1 and 4 for ten seconds or 2 and 3 if You radio does not have a fourth preset button.

How do I bypass Theftlock on a GM radio?

To disable the Theftlock feature, enter the user or factory back-up code as follows:

1. Write down the user or factory back-up code.
2. Turn the ignition to ACCESSORY or RUN.
3. Turn the radio OFF.
4. Press the 1 and 4 buttons together.
5. Press the Minute button and “000” will appear on the display.

How do I reset my Chevy radio?

To reset your Chevy MyLink system entirely, hold down the Home and Fast Forward buttons simultaneously for 10 seconds. This should reboot the system and resolve any problems that you’re having.

How do you unlock a Delphi radio?

I have a Delphi Delco Am/Fm/CD radio that is locked from loosing power….

1. Turn the ignition ON (The radio displays LOC)
2. Hold down the Radio Presets 2 and 3 buttons for six seconds.
3. The radio display changes from LOC to a three-digit number.
4. Press the AM/FM button.
5. The radio display changes to another three-digit number.