How do you open a Cobalt trunk with a dead battery?
Dead battery, key locked in the ignition. I read the comments. Yes you can open the little square tab under the steering column and feel around with your finger for a tab to push, near where the key is and you can turn the key back and pull it out.
How do you jumpstart a Cobalt?
The battery in your 2006 Chevrolet Cobalt is located in the spare tire well in the trunk. When jump starting your Cobalt you should find a marked post for the positive and negative cables under the hood where you can connect the jumper cables.
How do you start a Chevy Cobalt without the key?
If You do not have the keys to Your Chevy Cobalt then there unfortunately is no good way to start the vehicle. The system uses a transponder to allow the ignition system to work and without that transponder present in the car the ignition circuitry will not work.
How do you get into the trunk of a Chevy Cobalt without the key?
Open either rear door, and make sure the rear passenger seatbelts are disconnected. Push the trunk-release button next to your steering column, or use your keyless remote to open the trunk. Locate the two levers against the back of the rear seats inside the trunk. Pull one or both of the levers to unlatch the seat.
What cars have batteries in the trunk?
The Chrysler 300, Dodge Charger, and Dodge Challenger have the battery in the back. Why put all of the weight up front? When the rear wheels do just as much work, and in the rwd configuration they do all of the work. The Dodge cars, and Mercedes come in rear wheel drive or all wheel drive.
Why is my battery in my trunk?
Because the engine is typically under the hood, cars naturally have more weight on the front wheels than on the rear wheels, and moving the battery under the trunk is a way to combat this uneven weight distribution.
Why BMW has battery in trunk?
Most BMW models have a trunk-mounted battery, rather than a traditional engine-bay-mounted battery. This is due to limited engine bay space (large engine in a small area) and the desire to keep the weight balance as close to 50/50 as possible.
Where is the Volvo battery?
The 12 V support battery is located in a box next to the strut tower. If the car is equipped with a 48V support battery instead, it is located under the cargo area. The box over the 48V support battery must only be removed by an authorised workshop.
How long do Volvo hybrid batteries last?
We guarantee the battery in your hybrid for 8 years or 100,000 miles*
How many amps can 4 0 welding cable handle?
310 Amps
How do you determine welding cable size?
You can find it either on the side of your welding machine or the owner’s manual. Once you know these three things, it’s time to pick your cable. The sizes are measured by an American Wire Gauge (AWG) size. The smaller the diameter, the larger the size number.
What does 2 0 copper weigh per foot?
A 0000 gauge wire will weigh 640.5005 lbs per 1000 feet, while a 40 gauge wire weights 0.0299 lbs per 1000 feet. See the following chart for standard copper wire weight information. Subsequently, question is, how much does a spool of copper weigh?…What does 2 0 copper weigh per foot?
| AWG | Diameter | Weight |
|---|---|---|
| 00 (2/0) | 0.3648 | 402.8 |
What does 3 0 copper weigh per foot?
#750 mcm weighs about . 83 pounds per foot. Weight: 50.0 lbs/1000ft. or by-the-foot….What does 3 0 copper weigh per foot?
| AWG | Diameter | Weight |
|---|---|---|
| 000 (3/0) | 0.4096 | 507.9 |
| 00 (2/0) | 0.3648 | 402.8 |
What does 1000 feet of copper wire weigh?
A 0000 gauge wire will weigh 640.5005 lbs per 1000 feet while a 40 gauge wire will weigh 0.0299 lbs per 1000 feet Standard copper wire weight information can be found in the following chart.
How much does 1000 2 12x Romex weigh?
Weight is 82 lbs per 1000 feet.
How much does a 250 ft roll of 12 2 Romex weight?
Technical Details
| Manufacturer | Colonial Wire |
|---|---|
| Item Weight | 22.1 pounds |
| Product Dimensions | 20 x 20 x 15 inches |
| Item model number | Romex12/2 |
| Is Discontinued By Manufacturer | No |
How much does a 250 ft roll of 14 2 Romex wire weigh?
Technical Details
| Manufacturer | Southwire Company® |
|---|---|
| Part Number | 8153819 |
| Item Weight | 15 pounds |
| Is Discontinued By Manufacturer | No |
| Item Package Quantity | 1 |
What does a 250 foot roll of 10 3 Romex weigh?
Weight: 26.75 lbs.
How many wires does 10 3 have?
If it’s a flexible cord (like an extension cord), then 10/3 means 3 insulated conductors and no ground, 3 wires only. To connect a gen like your to a transfer switch (or breaker interlock), you’ll need 3 conductors plus a ground.
How much does a roll of 10 3 Romex weight?
Technical Details
| Manufacturer | Southwire |
|---|---|
| Part Number | 63948426 |
| Item Weight | 16.33 pounds |
| Product Dimensions | 13 x 3.5 x 13 inches |
| Item model number | 63948426 |