Where is the computer located on a Ford F-150?

Where is the computer located on a Ford F-150?

Both the internet and your owner’s manual should help you to locate the PCM for your specific vehicle, You can do so by looking up the PCM by the code you obtain. Most of the newer F-150s have the PCM located behind the driver’s kick panel with the connector protruding through the firewall.

Where is the PCM located on a 1998 Ford F150?

The PCM is located under the dash behind the passenger side kick panel. With the panel removed, remove the small black plastic clip that secures the PCM to the mounting bracket.

Where is computer on 1990 F150?

Re: location of engine control computer (module) on a 1990 f The EEC is located behind the left kick panel behind the parking brake pedal. The thumbnail is a picture of the back-side of my kick panel. You will need to remove the bottom door trim piece that holds down the carpet.

Where is the PCM on a 1992 Ford F150?

1992-1993 F150-F350 PCM 60 Pin Connector (4.9L, 5.0L, 5.8L Only) The fuel injection computer (known in tech speak as the PCM = Powertrain Control Module) is located on the firewall (passenger side) of your Ford pickup.

Where is the ECM located on a 2003 Ford F150?

On the 2003 Ford F-150, the powertrain control module (PCM) is located under the dash behind the passenger’s side kick panel. However, the connector is only accessible through the engine bay; You won’t be able to remove it from the cabin of the truck.

Where is the PCM relay located?

engine main fuse relay control box

Where is the computer located in a 2002 Ford f150?

Re: Location of Computer Module IT IS UNDER THE PASSENGER SIDE KICK PANEL.

What is ECM on Ford F150?

Your Ford F150’s ECM (Engine Control Module) is its brain. Just like a human’s brain, your F150 can’t function without it. It is sometimes referred to as the ECU or PCM. The ECM controls and directs your entire drivetrain (unless there is a serrate transmission controller).

How do you reset your body control module?

Can a body control module be reset?

1. STEP #1 Disconnect Battery.
2. STEP #2 Locate the BCM.
3. STEP #4 Remove and Reinstall.
4. STEP #5 Connect Battery and Test.