What kind of oil does a 1998 Ford f150 take?
Engine Oil This specification has been updated from 5W-30 to 5W-20 per a Technical Service Bulletin from the manufacturer 5W-20 is the preferred viscosity. Capacity: 6 quarts (with filter)When refilling, remove dipstick to provide adequate venting and allow oil to flow into crankcase. After refill, check oil level.
What type of oil does a Ford f150 take?
Recommended Oil Viscosity for the Ford F-150 According to the 2020 Ford F-150 Owner’s Manual, most engine options will use SAE 5W-30 engine oil or SAE 0W-30 (for 22-below weather temperatures). Motorcraft brand oil is preferred, but any API (American Petroleum Institute)-certified brand is fine to use.
What transmission fluid does a 92 f150 take?
Mobil 1 Synthetic Transmission Fluid Dexron/Mercon 1 Quart.
What kind of transmission fluid does a 2007 Ford f150 take?
The type of transmission fluid the 2007 Ford F-150 uses is Dexron/Mercon.
How many quarts does a 6R80 hold?
Ford 6R80 Transmission Specs
| Transmission: | Ford 6R80 (ZF 6HP26) |
|---|---|
| ATF Type/Spec: | MERCON LV Motorcraft XT-10-QLVC |
| Fluid Capacity: | 13 qts (U.S. quarts) |
| Transmission Filter: | Motorcraft FT188 |
| Service Intervals: | Replace transmission fluid and filter every 150,000 miles |
Is the 6R80 a good transmission?
The Ford 6R80 transmission is an impressively strong, band free, 6 speed automatic transmission modeled after the renowned and respectable ZF 6HP26 six speed automatic transmission. The 6R80 features a durable, dependable, band-free design, equating to less complexity than its earlier four speed predecessors.
How much power can a 6R80 handle?
The 6R80 has already been field-proven to accept up to 1000HP in stock form, with only ECU tuning. With aftermarket components, the 6R80 will likely handle much more power. Stock applications already employ a multi-plate torque converter clutch, enabling greater power handling in lockup.
How much HP can a 6.2 Ford handle?
Engine Specs & Differences
| Engine | 6.2L SOHC 2-Valve Flex Fuel V8 | 6.7L Powerstroke V8 Turbo Diesel |
|---|---|---|
| Horsepower | 385 HP | 475 HP |
| Torque | 430 lb.-ft. | 1,050 lb.-ft. |
| Max. Towing Capacity | 15,000 lbs. | 20,000 lbs. |
Will a 6R80 bolt to a 351W?
This is a 2015 (Coyote) 6R80 bolted directly to the 351W. Three original bellhousing bolt holes line up; plus, the two alignment dowels line up. I’ll probably re-design the alignment dowel closest to the starter to allow the 351W bellhousing bolt to pass thru the dowel and engage threads in the Windsor block.
Will a 6R80 bolt up to a 302?
Use this adapter to bolt your 6R80 Ford transmission to any engine block using the standard Small Block Ford bolt pattern. This kit works with pushrod 5.0 / 302″ and 5.8 / 351 Windsor engine blocks. This utilizes the starter and flexplate from your SBF and adapts to the 6R80.
What manual transmission fits a 351 Windsor?
A C-4 is a good reliable trans and will fit behind a 351W no problem. An AOD is another good option if you want taller gears and manners for highway cruising… A T-10 4 spd or T-5 5 speed is good too…
What vehicles have a 6R80 transmission?
The 6R debuted in 2005 in the 2006 model year Ford Explorer and Mercury Mountaineer. The 6R80 is featured in 2009 to present Ford F-150 pickups….Ford 6R transmission.
| 6R | |
|---|---|
| Overview | |
| Manufacturer | Ford Motor Company |
| Production | 2005–present |
| Model years | 2005–present |
How do I know if I have a 6R60 transmission?
To correctly identify the transmission/valve body type that you require, look on the Vehicle Certi ication Label, located on the driver’s door. Find the code letter/number under the “TR”. X 6R60 C 6R75 6 6R80 F ZF6HP26* G ZF6HP26* *F code applies only to ’05 Navigator, G code applies to all other ZF6HP26 years.