How should you cross railroad tracks on a forklift?
Question: What is the correct way to cross railroad tracks in a forklift? You should cross them carefully and slowly It’s best to move across diagonally, so that one wheel at a time crosses the tracks You should only cross at approved crossings.
Which of the following indicates the correct way to cross railroad tracks?
You should cross them carefully and slowly, it’s best to move across diagonally, so that one wheel at a time crosses the tracks, and you should only cross at approved crossings.
How do you cross a railroad track?
Any driver of a motor vehicle approaching a railroad crossing sign shall slow down to a reasonable speed. If required to stop, driver shall stop at the marked stop line. If there is no line, driver shall stop no less than 15 feet nor more than 50 feet from the railroad crossing.
How should motorcyclist cross train tracks?
How should a motorcyclist safely cross railroad tracks? Explanation: A rider should cross railroad tracks by traveling straight across them and remaining in their lane. It may be tempting to cross tracks at a ninety degree angle; however, that may cause the rider to travel into the opposite lane.
What special riding problems can affect a motorcyclist’s control?
3. What special riding problems can affect a motorcyclist’s control? Motorcycles crossing railroad tracks- tires can get stuck, mc carrying passengers – can lose balance more.
What makes it difficult for a vehicle drivers to judge a motorcycle’s speed and distance?
A motorcycles smaller size makes it difficult for vehicle drivers to judge a motorcycles speed and distance. The relatively small size of a motorcycle is lost in you blind spot areas is why motorcycles are often hard to see behind your vehicle.
What should your stopping distance be at night?
Under normal driving conditions, your stopping distance at night should be within the range of your headlights. Under normal driving conditions at night, your stopping distance is the distance you travel in four seconds at normal speeds and within the range of your headlights.
How long does it take to stop at 70 mph?
Driver Care – Know Your Stopping Distance
| Speed | Perception/Reaction Distance | Braking Distance |
|---|---|---|
| 50 mph | 73 feet | 125 feet |
| 60 mph | 88 feet | 180 feet |
| 70 mph | 103 feet | 245 feet |
| 80mph | 117 feet | 320 feet |
What is the stopping distance on a wet road?
Research has shown that at 30mph on a wet road, a car with tyres featuring 8mm of tread can come to a stop in 25.9 metres. Travelling in the same conditions at the same speed, a car with tyres with 3mm of tread will take 35 metres to come to a halt. When the tread is 1.6mm, the stopping distance increases to 43 metres.
What’s the stopping distance for 40mph?
Stopping distances at different speeds
| Speed | Thinking + braking distance | Stopping distance |
|---|---|---|
| 30mph | 9m + 14m | 23m (75 feet) |
| 40mph | 12m + 24m | 36m (118 feet) |
| 50mph | 15m + 38m | 53m (174 feet) |
| 60mph | 18m + 55m | 73m (240 feet) |
What is the braking distance on a wet road at 20 mph?
Braking Power/Stopping DistancesEdit
| Speed | Thinking Distance | Braking Distance |
|---|---|---|
| 20 mph | 20 feet (6.1 m) | 20 feet |
| 30 mph | 30 feet (9.1 m) | 45 feet |
| 40 mph | 40 feet (12 m) | 80 feet |
| 50 mph | 50 feet (15 m) | 125 feet |
Do you need to know stopping distances for theory test 2021?
Stopping distances are a favourite part of the theory test, but they’re not easy to remember. There are 3.3 feet in a metre – so divide the distance in feet by 3.3 to get the stopping distance in metres. You’ll need a calculator for that, but it shouldn’t be necessary for the theory test.
How long does it take to stop a car going 60 mph?
60 MPH = 88 fps. (fps=1.467 * MPH). If the vehicle deceleration rate is 20 fpsps (rather than the previously calculated 15 fps), then stopping time = 88/20 = 4.4 seconds.
How many inches should you sit away from the airbag?
10 inches
How long will it take you to pass a truck at 60 mph with oncoming traffic?
Traffic laws are instituted to protect you. As you examine these rules, you may wish to consider this fact: At 60 mph, a driver will travel 132 feet in 1.5 seconds (60 mph is 1 mile per minute, or 88 ft.